manualshive.com logo in svg

Sanyo XS1271, Инструкция по эксплуатации, Страница: 13 / 22

Поделиться
Скачать
Sanyo XS1271 Скачать руководство пользователя страница 13

13

OPERATION WITHOUT THE 
REMOTE CONTROL UNIT

If you have lost the remote control unit or it has trouble, follow the 
steps below.

When the air conditioner is not running

Each time the OPERATION button is pressed, the operation mode 
changes cyclically.

The temperature is set to the room temperature minus 4°F during 
the cooling operation, and the fan speed and flap are set to Auto.

CARE AND CLEANING

Ceiling panel (Indoor Unit)

Clean the ceiling panel of the indoor unit with a vacuum cleaner 
brush, or wipe it with a clean, soft cloth.

If it is stained, use a clean cloth moistened with a mild liquid 
detergent. When cleaning it, be careful not to force the flaps out of 
place.

Cleaning the flaps

• The air outlet flap can be removed and washed with water.
• Be sure to always stop operation before removing the flap. 
• After washing with water, allow it to dry, and then remount it.

• Do not move the flap with your hands.
• When using a footstool or the like, be careful not to let it tip 

over.

Cleaning the main unit and remote control unit

• Wipe clean using a soft, dry cloth.
• To remove stubborn dirt, moisten a cloth in warm water no hotter 

than 104 °F, wring thoroughly, and then wipe.

INDOOR UNIT

OPERATION button

OPERATION lamp 

Cooling operation

Stop

NOTE

• Cleaning and maintenance operations 

must be carried out by specially 
trained personnel.
While working in high places, slipping 
or falling may result in serious injury.

• For safety, be sure to turn the air 

conditioner off and also to disconnect 
the power before cleaning.

• Do not pour water on the indoor unit to 

clean it. This will damage the internal 
components and cause an electric 
shock hazard.

• Never use solvents, or harsh chemicals 

when cleaning the indoor unit. Do not 
wipe the plastic casing using very hot 
water. 

• Some metal edges and the fins are 

sharp and may cause injury if handled 
improperly; be especially careful when 
you clean these parts.

• The internal coil and other components 

of the outdoor unit must be cleaned 
every year. Consult your dealer or 
service center.

CAUTION

CAUTION

OI-108-13-EG

01_XS1872_EN.fm  Page 13  Thursday, September 25, 2008  8:31 PM

Содержание XS1271























Отзывы:

Нет отзывов