Sanyo Xacti VPC-CA8EX, Инструкция по эксплуатации

Страница: 133 / 216

115
English
EDITING VIDEO CLIPS
4
Specify the start point of the extract.
h
Use the procedure below to specify the frame from which the video
clip extract will start.
h
Play the video clip until approximately the desired point, pause the
video clip, then play the video clip one frame at a time, stopping at the
start point of the extract. This will be the first frame of the extract.
h
If the start point of the video clip is also the start point of the extract,
proceed to step
5 .
<Procedure>
Play:
After pausing playback, press and hold the [
H
] button for about
2 seconds for forward playback, or the [
G
] button for reverse
playback.
Pause:
During playback, press the SET button.
Accelerated playback:
During playback, press the [
G
] or [
H
] button to change the playback
speed.
Single frame:
After pausing playback, press the [
H
] button to move forward one
frame, or the [
G
] button to move back one frame.
5
Press the [T/
]
] button.
h
The start point of the video clip
extract is set, and the screen to
specify the end point appears.
h
Specify the end point of the
extract by following the same
procedure as in step
4 .
<When joining the first and latter
portions>
1
Press the [W/
P
] button.
h
Each time the [W/
P
] button
is pressed, the sections to
delete and the sections to
save are reversed.
2 Specify the end point of the
extract. The frame following the
end point of the extract will be
the start point of the latter
portion to be joined.
00:00:06
CUT
SAVE
End point
Portion to be deleted
Approximate playback time