English
34
SETTING THE DATE AND TIME
After initially inserting a card and
battery pack, the camera’s clock and
calendar must be set. When images are
recorded, the image data is saved with
the date and time of recording.
If the clock and calendar have not been
set, a message is displayed for a few
seconds each time the camera is turned
on. This message is also displayed if
the clock and calendar reset when the
camera is stored without battery pack
for a long period.
Use the left and right keys of the
controller
1
to select “Yes”. “No”
cancels the operation.
Press the center of the controller to
open the date/time setup screen.
Use the left and right keys to select the
item to be changed.
Use the up and down keys to adjust the
item.
Press the center button to set the clock and calendar.
The date/time setup screen can be opened in section 3 of the setup menu.
For customers in certain areas, the menu language must also be set. The
language is changed in section 1 of the setup menu (pages 91 and 96).
1
Yes
No
Set date and time.
10. 01. 2004
00 : 00
MM / DD / YYYY
:move :sel. :enter
Date/Time set
