Sanyo VCC-9400 Скачать руководство пользователя

Страница: 47 / 54

ALARM SETTING

A Alarm input setting

In the MAIN MENU, select ON for ALARM and press the
ENTER button.

The ALARM screen will appear.

Use the joystick lever (

) to select the external

alarm input number (Ex: 3), then press the ENTER button.

The ALARM IN 3 setting screen will appear.

☞

External alarm input polarity setting
(POLARITY)

Use the joystick lever (

) to select POLARITY

between “NO” and “NC”.

Available settings:

•

NO: Normal open (Normally open so closed condition is

detected as input.)

•

NC: Normal closed (Normally closed so open condition is

detected as input.)

Adjust the alarm input settings for ALARM IN 3 as
needed.

Move to preset setting (MOVE)

After activation of an alarm, the camera moves to the PRESET
POSITION with the same number as the alarm number.

Use the joystick lever (

) to move the cursor to MOVE,

then use the joystick lever (

) to select the preset move

option.

Available settings:

•

ON: When alarm is received, the camera moves to the

PRESET POSITION with the same number as the alarm
number.

•

OFF: Does not move to a PRESET POSITION.

Motion sensor input setting (MOTION)

Matches information from the camera’s motion sensor and the
external alarm and outputs it.

Use the joystick lever (

) to move the cursor to MOTION,

then use the joystick lever (

) to select the input.

Available settings:

•

OFF: Does not output a motion sensor alarm.

•

AND: Outputs an alarm when an external alarm input and

motion sensor alarm are detected at the same time.

External alarm input

Move to preset position

Motion sensor detection

When an external alarm input is received, the camera
moves to the preset position for the alarm input. After
moving to the position, an alarm is output if there is
detection by the motion sensor.

Returns to auto mode

•

OR: Outputs an alarm if either an external alarm or a motion

sensor alarm is detected.

Note:

•

The “AND” and “OR” sensor input options are only possible
when MOVE is set to “ON”.

•

When MOVE is set to “OFF”, MOTION SENSOR will
automatically be set to “OFF”.

ALARM

ALARM IN 3 ‚
MOVE MODE OFF
ALARM OUT OFF

ENTER

ALARM IN 3

POLARITY NO
MOVE OFF
MOTION OFF
ALARM OUT OFF
LINE OUT OFF
DURATION 5S

PRESET OFF
MENU BACK

ALARM IN 3

POLARITY NO
MOVE OFF
MOTION OFF
ALARM OUT OFF

DURATION

ALARM OUT

ALARM TIME

– 46 –

English

Содержание VCC-9400























































Результаты поиска

Содержание VCC-9400

Отзывы:

Похожие инструкции для VCC-9400

Бренды по названию

Популярные бренды

Sanyo VCC-9400, Инструкция по эксплуатации

Результаты поиска

Содержание VCC-9400

Отзывы:

Похожие инструкции для VCC-9400

Бренды по названию

Популярные бренды