CAMERA SETTINGS
D VIEW SETTING item flow
1
Select CAMERA
2
Select VIEW SETTING
☞
Signifies that CAMERA SETTING 1 is set.
In the CAMERA SETTING screen, the joystick lever can be
used (
d
or
c
) to select from VIEW SETTING 1 to another of
the nine VIEW SETTING patterns.
Note:
•
In any of these screens, moving the cursor to PRESET and
changing to ON will reset the values back to initial settings.
•
When each of the following functions is ON (shown by single
circle), it may be possible to use other functions in conjunction
with it (shown by double circle). View columns vertically to
determine which functions can be used together.
IRIS
AUTO: SENSE UP (ON)
F T T T T
MANU: EI (ON)
T F T T E
SHUTTER
LONG
T T F T T
SHORT
T T T F E
MOTION
T E T E F
F
: Function is set
T
: Not allowable
E
: Allowable
A
IRIS setting (See p22)
This setting allows selection of IRIS to
either autoiris (AUTO) or manual iris
(MANU). Initial setting is autoiris.
B
WHITE BALANCE adjustment (See p26)
This selects the white balance method to
be used. Three white balance methods
are available: auto trace white balance
(ATW), one-push automatic white
balance (AWC), and manual white
balance (MWB). Default setting is
full-time automatic white balance.
C
Electronic SHUTTER setting (See p29)
This setting chooses either a fast shutter
speed (SHORT) for target objects that
may be moving quickly or a slower
shutter speed (LONG) for darker target
objects.
D
MOTION detector setting (See p30)
This function generates an alarm when a
suspicious figure is detected. Each of the
settings will enable certain kinds of
detection based on the natural image
(swaying trees, flickers of light, etc.). It is
also possible to enable zooming in on
target objects and intruders that have
unusual brightness levels (moving,
bright) or are fast-moving.
E
Profile compensation setting (APERTURE)
(See p33)
This setting emphasizes the target object
profile (horizontally or vertically).
F
Automatic Gain Control (AGC) setting
(See p33)
This sets the gain of the AGC circuit.
When a target object is dark, the gain
changes and the object becomes lighter.
G
GAMMA correction setting (See p34)
This setting enables contrast sensitivity to be boosted by controlling
the gamma characteristics. Three gamma controls are available:
gamma correction (ON), smart gamma correction 1 (SMART 1),
and smart gamma correction 2 (SMART 2). Initial setting is ON.
MAIN MENU
LANGUAGE SET ‚
PRESET POSITION SET ‚
CAMERA SET ‚
AUTO MODE SQE ‚
AUTO FLIP OFF
ALARM OFF
FREEZE OFF
REFRESH OFF
STARTING POINT OFF
MENU END
ENTER
ENTER
CAMERA SETTING
SYNC INT
PRIVACY MASK SET ‚
LENS SET ‚
VIEW SETTING 1 ‚
PRESET OFF
MENU BACK
VIEW SETTING 1
IRIS AUTO ‚
WHITE BALANCE ATW ‚
SHUTTER OFF
MOTION OFF
APERTURE ON ‚
AGC ON ‚
GAMMA ON
PRESET OFF
MENU BACK
☞
A
B
C
D
E
F
G
IRIS SETTING
BLC OFF
SENSE UP OFF
(LEVEL)
40
PRESET OFF
MENU BACK
ATW SETTING
MASKING OFF
SMART ATW OFF
PRESET OFF
MENU BACK
ES SETTING
SHUTTER SPEED 60
PRESET OFF
MENU BACK
MOTION SETTING
SIZE SET ‚
MASKING OFF
SENSITIVITY SET ‚
ZOOM OFF
INTERVAL 5S
PRESET OFF
MENU BACK
APERTURE SETTING
H 8
V 8
PRESET OFF
MENU BACK
GAIN SETTING
MAX GAIN ±0·
DNR OFF
PRESET OFF
MENU BACK
English
– 21 –
