SPECIFICATIONS
Camera:
Scanning system
:
PAL standard (625 TV lines,
25 frames/sec.)
Interlace
:
PLL 2:1 interlace
Image device
:
1/3 inch solid state image device CCD
Picture elements
:
795 (H) x 596 (V)
Effective picture elements
:
752 (H) x 582 (V)
Synchronizing system
:
Internal sync, Line lock sync switchable,
External sync
Resolution
:
480 TV lines horizontally, 400 TV lines
vertically
Video output level
:
1.0 Vp-p/75 ohms, composite
Video S/N ratio
:
More than 48 dB
Y/C signal outputs
:
Y: Video; 0.7 Vp-p + sync; 0.3 Vp-p/
75 ohms
C: Burst; 0.3 Vp-p/75 ohms
Minimum required
illumination
(incandescent lighting)
:
Approx. 0.05 lux with a F 1.2 lens (32X
electronic sensitivity),
Approx. 1.4 lux with a F 1.2 lens (normal
mode)
Backlight compensation
:
ON/OFF setting, Multi-zone light
measuring system (Active when using
an auto-iris lens)
Iris function
:
Manual ON/OFF switching
Electronic iris range
:
1.4 lux to 70,000 lux (F 1.2, lens: color
mode)
2.0 lux to 100,000 lux (F 1.4, lens: color
mode)
Flange-back
:
12.5 mm
±
0.5 mm
White balance
:
ATW/AWC/MWB setting
Electronic shutter
:
8 speeds, selectable by setting
•
SHORT: 1/50, 1/120, 1/250, 1/500, 1/1000, 1/2000, 1/4000,
1/10000 sec.
•
LONG: X1, X2, X4, X8, X16, X32
Electronic sensitivity
:
AUTO/OFF, up to X32
Electronic zoom
:
ON/OFF
Continuance, up to X8
Fix, X2/X4/X8
Pan/tilt operation
Motion detector
:
ON/OFF
Alarm out: 2 pin terminal and RS-485
bus line
AGC
:
ON/OFF
Gamma
:
ON/OFF (
γ
= 1)
Mirror image effect
:
H, V, HV, 3 mode reverse image
Camera ID
:
ON/OFF, up to 8 characters
Communication
:
RS-485, operation via SSP
Lens mount
:
CS mount (or C mount with the
supplied adaptor)
Environmental conditions
:
Temperature: –10˚C ~ +50˚C
Humidity: less than 90% (no
condensation)
Power supply
:
24 V AC/12 V DC
Power consumption
:
24 V AC : 50 Hz
4.0 W (with auto-iris lens)
3.3 W (without auto-iris lens)
12 - 15 V: DC
4.1 W (with auto-iris lens)
3.2 W (without auto-iris lens)
Weight
:
Approx. 470 g (without lens)
L53R2/XE GB 2000, 3, 31
64
English
