USING THE MENU SCREEN
MOTION
The following settings can be made from the
MOTION
menu.
A
Operating direction detection function (DIRECTION):
Sets the camera to detect only movement in a certain direction.
B
Size setting function (SIZE):
Sets the size of the objects to be detected when movement is
being detected.
C
Mask area setting function (MASKING):
Sets a mask for places where movement is not to be detected.
D
Sensitivity setting function (SENSITIVITY):
Sets the amount of sensitivity for parameters such as movement,
level, light difference and time interval.
E
Continuous electronic zoom function for movement
detection (ZOOM):
When a doubtful movement is detected, the zoom ratio is set to
X2 and any further movement is tracked.
F
Alarm interval setting function (INTERVAL):
Sets the amount of time for no output when an alarm is received.
G
Alarm signal setting function (ALARM SIGN):
Causes the camera ID to flash when an alarm signal is detected.
Note:
•
If the whole background is empty, detection may not be performed
properly.
•
If the camera is subjected to vibration, incorrect detection may
happen.
•
Adjusting each item to the optimum setting will improve detection,
however there will always be situations where incorrect detection
or no detection happens.
•
This unit is not desined for theft or fire prevention. No guarantee is
given against any accident or damage that may occur.
L53R4/US GB 1999, 12, 7
English
37
