ADJUSTMENTS
APERTURE
1
Press the
CURSOR
(
j
or
l
) button to select the
WRITE PROTECT
function setting, then press the
CURSOR
(
d
or
c
) button to select
OFF
, then press the
SET
button.
2
Press the
CURSOR
(
j
or
l
) button to select
NEXT PAGE
(get it flashing), then press the
SET
button.
The second page of the “
MENU FOR ADJUSTMENT
” will be displayed.
3
Press the
CURSOR
(
j
or
l
) button to select
APERTURE
(get it flashing), then press the
SET
button. The
adjustment sub-menu “
ADJUSTMENT FOR APERTURE
” will be displayed.
4
Press the
CURSOR
(
d
or
c
) button to adjust the aperture setting (0 to 15 range). The on-screen marker
(
b
) will move and the adjustment value will flash according to the aperture setting.
At this time the menu display will be cancelled, and you cannot return from this display to the menu
display. (This happens even if the PRESET setting is set to
ON
.) To return to the camera display, use the
CURSOR
buttons to select
END
(get it flashing), then press the
SET
button.
A higher setting value will give a sharp pictures, a lower setting value will give a soft pictures.
Note:
When an adjustment is made, the PRESET setting will automatically switch to
OFF
. To return to the
initial values, just return the PRESET setting to
ON
, then press the
SET
button.
5
When finished. (Refer to step
4
on page
16
.)
SET
CURSOR
SHUTTER 50
WRITE PROTECT OFF
NEXT PAGE END
MENU FOR ADJUSTMENT
CAMERA ID ON
APERTURE
ADJUSTMENT FOR APERTURE
o------z------p 6
ADJUSTMENT FOR APERTURE
o------z------p 9
PRESET OFF
END
L53P4/XE (VCC-5974P) GB 1998, 3, 23
English
27
