ADJUSTMENTS
VBS phase adjustment
1
Press the
CURSOR
(
j
or
l
) button to select the
WRITE PROTECT
function setting, then press the
CURSOR
(
d
or
c
) button to select
OFF
, then press the
SET
button.
2
Connect a
VBS
signal source to the
VBS IN
connector on the camera.
The on-screen setting will automatically switch to
VBS
. Press the
CURSOR
(
j
or
l
) button to select the
on-screen
VBS
setting (get it flashing), then press the
SET
button. The adjustment sub-menu
“
ADJUSTMENT FOR VBS
” will be displayed.
3
Press the
CURSOR
(
d
or
c
) button to adjust the horizontal phase (
H
). The on-screen marker (
b
) will
move and the adjustment value will flash according to the horizontal phase setting.
When finished setting the horizontal phase (
H
), press the
CURSOR
(
l
) button to select the sub-carrier
(
SC
) phase.
4
Press the
CURSOR
(
d
or
c
) button to adjust the sub-carrier (
SC
) phase. The on-screen marker (
b
) will
move and the adjustment value will flash according to the sub-carrier phase setting.
Note:
When an adjustment is made, the PRESET setting will automatically switch to
OFF
. To return to the
initial values, just return the PRESET setting to
ON
, then press the
SET
button.
5
When finished. (Refer to step
4
on page
16
.)
Note:
If using a VS sync signal, the H sync phase adjustment is made by following the same method as
described for the “
VBS phase adjustment
”.
ADJUSTMENT FOR VBS
(PHASE)
H o------z------p 280
SC o------z------p 90
SET
CURSOR
MENU FOR ADJUSTMENT
SYNC VBS
IRIS AI
BLC OFF
L53P4/XE (VCC-5974P) GB 1998, 3, 23
English
17
