WHITE BALANCE
PRESET MODE 2 (indoors, fluorescent lighting) setting adjustment
1
Press the
CURSOR
(
j
or
l
) button to select the
WRITE PROTECT
function setting, then press the
CURSOR
(
d
or
c
) button to select
OFF
, then press the
SET
button.
2
Set the
WB
switches to the PRESET mode (switch 7 to
OFF
and switch 8 to
ON
).
The on-screen setting for
WHITE BALANCE
will automatically switch to PRESET. Press the
CURSOR
(
j
or
l
) button to select the on-screen PRESET setting (get it flashing), then press the
SET
button. The
adjustment sub-menu “
ADJUSTMENT FOR WB
” will be displayed.
3
Press the
CURSOR
(
d
or
c
) button until
MODE 2
is selected, then press the
SET
button. The
adjustment sub-menu “
OFFSET
” will be displayed.
4
Press the
CURSOR
(
d
or
c
) button to adjust the
R
(red) offset. The on-screen marker (
b
) will move and
the adjustment value will flash according to the red offset setting.
When finished setting the red offset, press the
CURSOR
(
l
) button to select
B
(blue).
Press the
CURSOR
(
d
or
c
) button to adjust the
B
(blue) offset. The on-screen marker (
b
) will move
and the adjustment value will flash according to the blue offset setting.
Note:
When an adjustment is made, the PRESET setting will automatically switch to
OFF
. To return to the
initial values, just return the PRESET setting to
ON
, then press the
SET
button.
5
When finished. (Refer to step
4
on page
16
.)
Note:
The
OFFSET
settings for
MODE 1
and
MODE 3
are made by following the same method as described
for
MODE 2
.
7
SET
CURSOR
8
WB
MENU FOR ADJUSTMENT
SYNC INT
IRIS AI
BLC OFF
WHITE BALANCE PRESET
AGC ON
ADJUSTMENT FOR WB
WB PRESET MODE 1
WB PRESET MODE 2
ADJUSTMENT FOR WB
(OFFSET)
R o------z------p 29
B o------z------p189
PRESET OFF
END MENU
L53P4/XE (VCC-5974P) GB 1998, 3, 23
22
English
