Sanyo VA-80LAN, Инструкция по эксплуатации

Страница: 23 / 34

SCHEDULE SETTINGS
(“admin” only)
22 English
■
AUTO MODE SCHEDULE
The auto-mode function operates the camera at the scheduled time automatically according to the
specified operation pattern.
You can specify up to two auto-mode operation patterns per day.
1
Day of the week (WEEK)
Enables/disables the schedule function and
operation mode setting for each day of the week.
Select the checkbox to enable the schedule and the
operation mode for that day of the week.
MEMO:
If you want to enable the same schedule every day,
select “DAILY” at the bottom of the column and
specify the details.
2
START
Specifies the start time for performing the operation.
3
COMMAND
Select the operation mode from [COMMAND] and
specify the registration number for the operation
pattern.
4
[COPY] button
Copies the setting of the selected row. Clicking the
[COPY] button stores the setting in the memory
buffer and turns the button color to red.
5
[PASTE] button
Replaces the row where the [PASTE] button is
clicked with the setting copied using the [COPY]
button.
MEMO:
• When the auto-mode operation completes, the
camera returns to the original monitoring position.
However, when the auto-return function is enabled
on the camera, the specified operation mode is
activated after the auto-mode operation.
• When you perform any camera operation (pan/tilt/
zoom/menu operation) during the auto-mode
operation, the camera does not return to the original
monitoring position when the auto-mode operation
completes. Return the camera manually to the
original monitoring position.
• When both the day of the week checkbox (SUN -
SAT) and the [DAILY] checkbox are selected, the
earlier start time setting precedes. If the start time
settings are same for both checkboxes, the day of
the week setting takes precedence.
• If the [START] time settings on the left and right are
same and the settings selected for [COMMAND] on
the left and right are different, the setting selected
for [COMMAND] on the left takes precedence.
• If the start time setting is changed after the
auto-mode operation has started, the specified
operation will run according to the updated
schedule.
4 5 3 3 1 2 2
COMMAND Registration number
SEQUENCE A - D
AUTO PAN 1 - 4
TOUR 1 - 4
PRESET
1 - 127
(x30 zoom model)
1 - 255
(x36 zoom model)