CONNECTIONS
Connect the video camera and monitor TV as shown in the figure below.
NOTE:
Before making the connections, make sure all the devices are disconnected from the power outlet.
MIC IN
EXT
TIMER IN COM
WARNING
OUT
SW
OUT
OUT
IN
COM
ALARM
REMOTE
TAPE
END OUT
OUT
CLOCK SET
IN
OUT
SERIES
IN
COM
TIMER
OUT
1SHOT
IN
ALARM
RESET IN
VIDEO
AUDIO
OUT
IN
S-VIDEO
IN
OUT
Video camera
(sold separately)
Monitor TV (sold separately)
Coaxial cable
(sold separately)
To
VIDEO IN
terminal
To
VIDEO OUT
terminal
From an external
audio source
To
outlet
IMPORTANT NOTE (U. K. Only)
The wires in the mains lead are coloured according
to the following code:
Blue:
Neutral
Brown:
Live
If the colours of the wires in the mains lead of this
apparatus do not correspond with the colour
markings identifying the terminals in your plug,
proceed as follows:
•
The wire which is coloured blue must be
connected to the terminal which is marked with
the letter N or coloured blue or black.
•
The wire which is coloured brown must be
connected to the terminal which is marked with
the letter L or coloured brown or red.
•
Do not connect either wire to the Earth terminal.
NOTES:
•
For more details, please refer to the manuals
accompanying all other devices. If the connections
are not made properly, it may cause a fire or damage
the equipment.
•
This VCR is equipped with S-VIDEO input/output
connectors for high quality video signal input/output.
If connecting this unit to a device equipped with an
S-VIDEO input/output connector, please use an
S-cable (sold separately).
•
When using the S-VIDEO IN jack, set the INPUT
SELECT switch to the “S-VIDEO” position.
GB
FE4QS/EX (TLS-S7000P GB) Wed. Mar., 24/1999
6
English
