AUTOREPEAT RECORDING
MENU 3
Autorepeat Recording
The same tape can be recorded over many times.
1
Press the MENU button to display the MENU 3
(OTHERS).
2
Press the SHIFT
]
button, until the “REPEAT”
setting is flashing.
3
Press the REC/PLAY SPEED
l
(or
j
) button to
set the desired autorepeat recording mode.
MODE 1 . . . . . . . . The autorepeat mode is
automatically canceled if
there is an alarm trigger
MODE 2 . . . . . . . . Autorepeat recording takes
place even if there is an
alarm trigger
4
Press the SEARCH/AUDIO ON button, the normal
screen is displayed.
°
The setting procedure is now completed.
5
Set the REPEAT REC switch to the “ON” position.
°
The REPEAT LED will light.
ON . . . . . . Autorepeat recording function on
OFF . . . . . Autorepeat recording function off
6
Press the REC button.
°
Recording will start. When the tape end is
reached, the VCR will rewind it to the
beginning regardless of the counter memory,
and recording will resume.
NOTES:
•
If during autorepeat recording mode, the REPEAT
REC switch is set to the “OFF” position, the recording
will continue to the end of the tape then it will be
rewound to the beginning and stop. “OFF” will be
displayed on the digital display.
•
If during autorepeat recording there is an alarm
trigger, “AL” is displayed on the digital display and
alarm recording will take place. (Please refer to page
19, “ALARM RECORDING”.)
•
If the “REPEAT” setting is MODE 1, the REPEAT
LED will go off if there is an alarm trigger.
MENU 3 (Initial screen)
<BUZZER SET>
ALARM IN Y
TAPE END Y
KEY IN N
<OTHERS>
REPEAT MODE1
TAPE END -3M
ALARM MODE Y
CLOG DETECT. Y
RS-232C 1200
GB
FE4QS/EX (TLS-S7000P GB) Wed. Mar., 24/1999
14
English
