PROGRAM TIMER RECORDING
2
MENU 4
Changing a Program Timer Recording
1
Press the MENU button to display the MENU 4
(TIMER SET).
2
Press the
«
(or
]
) button, until the setting to correct
is flashing.
3
Press the
l
(or
j
) button, to correct the setting.
4
Press the PAUSE/SCAN button, the normal screen is
displayed.
5
Press the TIMER button.
To Cancel a Program Timer Recording
1
Press the MENU button to display the MENU 4
(TIMER SET).
2
Press the
«
(or
]
) button, until the “Y” corresponding
to the timer recording to cancel is flashing.
3
Press the
l
(or
j
) button, to select “N”.
4
Press the PAUSE/SCAN button, the normal screen is
displayed.
5
Press the TIMER button.
To Cancel all Program Timer Recordings
1
Press the MENU button to display the MENU 4
(TIMER SET).
2
Press the MENU RESET button.
°
All programmed timer recordings are erased.
3
Press the SPAUSE/SCAN button, the normal screen
is displayed.
NOTES:
•
During timer recording or timer recording stand-by, all
the buttons on the VCR, except the TIMER button, are
disabled.
•
If the power fails, the recording will be interrupted.
When the power is restored, the recording will resume if
the stop time has not yet been reached, and “
@
” will be
displayed on the digital display. The VCR internal
battery is completely recharged after the VCR has been
connected to a live outlet for 48 hours, and it will
maintain all the VCR settings memory for up to 30 days.
•
Set the timer recordings so that the recording times do
not overlap. If they do, the one with the earliest
recording start time will have priority. (See chart below.)
•
To set two or more timer recordings for a same day of
the week, press the
«
(or
]
) button, until the day of the
week for the second recording is flashing, then press
the
l
(or
j
) button, to set the desired day of the week.
•
If no timer recording is set, when the TIMER button is
pressed the timer recording indicator “
n
” will start
flashing and a buzzer will be heard.
•
If “OFF” is displayed on the digital display, timer
recording is not possible in order to prevent the
recorded tape to be recorded over.
•
Even if OVERWRITE INHIB. in MENU3 (SET UP) is set
to “Y”, the tape will not be fast-forwarded before
recording starts.
Program 1
7:00PM
These portions will
not be recorded
10:00PM
8:00PM
9:00PM
Program 2
Program 3
NC4QG/U (SRT-612DC GB) Wed. June, 06/2001
16
