Sanyo SRT-2400DC Скачать руководство пользователя страница 30

Страница: 30 / 50

PROGRAM TIMER RECORDING

Setting the Holidays

By setting the holidays, timer recording will be conducted
on those days, as set for Sundays.

Press the MENU button until the (HOLIDAY SET)
menu is displayed.

@@@@@<HOLIDAY@SET>

@@1@@-----@@@11@@-----

@@2@@-----@@@12@@-----

@@3@@-----@@@13@@-----

@@4@@-----@@@14@@-----

@@5@@-----@@@15@@-----

@@6@@-----@@@16@@-----

@@7@@-----@@@17@@-----

@@8@@-----@@@18@@-----

@@9@@-----@@@19@@-----

@10@@-----@@@20@@-----

Press the

(or

) button to set the month of the

holiday, then press the

button.

Press the

(or

) button to set the day of the holiday.

Press the

(or

]

) button until the next line to set

start flashing.

Repeat steps

to set up to 20 holidays.

Press the PAUSE/SEARCH button to save the
settings.

NOTE:

•

If setting holidays, be sure that a timer recording is set
for Sunday. If not, this function will not operate.

•

If a timer recording for Sundays is entered, the holidays
timer recording will not function if the program timer
recording mode is set to “N”.

•

To erase a setting, follow the same procedure as
above, but at step

and

, enter “

” instead of a

setting.

Changing a Program Timer Recording

Press the MENU button until the (TIMER SET) menu
is displayed.

Press the

(or

]

) button until the setting to correct is

flashing.

Press the

(or

) button to correct the setting.

Press the PAUSE/SEARCH button to save the
settings.

Press the TIMER button.

To Cancel a Program Timer Recording

Press the MENU button until the (TIMER SET) menu
is displayed.

Press the

(or

]

) button until the “Y” corresponding

to the timer recording to cancel is flashing.

Press the

(or

) button to select “N”.

Press the PAUSE/SEARCH button to save the
settings.

Press the TIMER button.

To Cancel all Program Timer Recordings

Press the MENU button until the (TIMER SET) menu
is displayed.

Press the MENU RESET button.

All programmed timer recordings are erased.

Press the PAUSE/SEARCH button, the normal
screen is displayed.

NU4QG/NA3 (SRT-2400DC GB) Mon. Sept., 17/2001

English

Содержание SRT-2400DC



















































Результаты поиска

Содержание SRT-2400DC

Отзывы:

Похожие инструкции для SRT-2400DC

Бренды по названию

Популярные бренды

Sanyo SRT-2400DC, Инструкция по эксплуатации

Результаты поиска

Содержание SRT-2400DC

Отзывы:

Похожие инструкции для SRT-2400DC

Бренды по названию

Популярные бренды