Sanyo SRT-2400DC, Инструкция по эксплуатации

Страница: 3 / 50

PRECAUTIONS
Location
For safe operation and satisfactory performance of your
VCR, keep the following in mind when selecting a place
for its installation:
•
Shield it from direct sunlight and keep it away from
sources of intense heat.
•
Avoid dusty or humid places.
•
Avoid places with insufficient ventilation for proper heat
dissipation. Do not block the ventilation holes of the
VCR. Do not place the unit on a carpet because this will
block the ventilation holes.
•
Install the VCR in a horizontal position only.
•
Avoid locations subject to strong vibrations.
•
Avoid moving the VCR between cold and hot locations
(see “Moisture Condensation Problems”, this page).
•
Do not place the VCR directly on top of the TV, as this
may cause playback or recording problems.
Avoiding Electrical Shock and Fire
•
Do not handle the power cord with wet hands.
•
If any liquid is spilled on the VCR, unplug the power
cord immediately and have the unit inspected at a
factory-authorized service center.
•
Do not place anything directly on top of this VCR.
Moisture Condensation Problems
Cause:
When the VCR is first installed, moved from a cold area to
a warm area or placed in a location with high humidity,
dew (moisture) may form in the unit. The Dew indicator
(
À
) blinks. If you operate the VCR with dew inside,
damage may result.
Prevention:
1
Do not operate the VCR for approximately 2 hours.
When the VCR reaches room temperature, the Dew
indicator (
À
) will turn off and the VCR will be ready to
operation.
NU4QG/NA3 (SRT-2400DC GB) Mon. Sept., 17/2001
2
English