Sanyo SCP-7500, Руководство по эксплуатации

Страница: 13 / 75

12
This option appears when you press after entering 4-digit and press MENU/OK.
Abbrev. Dial to dial the phone number in your Contacts list that ends with the four digits
you enter. (See “Abbreviated Dialing” on page 16.)
Answering Calls
1. Make sure your phone is on. If your phone is off, incoming calls go to voicemail.
2. When your phone rings, press TALK or SPEAKER.
3. To disconnect the call, press END/ .
Depending on your settings, your PCS Phone notifies you of incoming calls in the following
ways:
The phone rings and/or vibrates.
The LED flashes.
The backlight illuminates.
The screen displays an incoming call message.
If available, the phone number of the caller is displayed.
If the phone number is in your Contacts list, the Contacts entry’s name is displayed.
The picture is displayed when you have set the downloaded picture to “Incoming Calls”.
The following options are also displayed by pressing Options (right softkey). To select an
option, highlight it and press MENU/OK.
Call Guard to answer the call when you are in roaming. (This feature appears when you
are in digital area and analog service area.) See page 37 for setting Call Guard.
Answer to answer the call.
Answer:Speaker to answer the call in speakerphone mode.
Screen Call to answer the call by using pre-recorded announcement. (This feature appears
when you are in Service area or digital roaming area.) See page 57 or setting up.
Quiet Ringer to mute the ringer. (This feature appears when the ringer is set.)
To answer a call when you are roaming and Call Guard is enabled, you must press MENU/OK,
select Answer or Answer:Speaker and press MENU/OK to answer the call. See page 37 for
setting Call Guard.
Note: If your phone is off, the incoming calls go to voicemail.