19
English
To unmount indoor unit
Press the 2
L
L
marks on the lower part of the indoor
unit and unlatch the tabs. Then lift the indoor unit and
unmount. (Fig. 42)
3-9. Drain Hose
a)
The drain hose should be slanted downward to
the outdoors. (Fig. 43)
b)
Never form a trap in the course of the hose.
c)
If the drain hose will run in the room, insulate the
hose with insulation* so that chilled condensation
will not damage furniture or floors. (Fig. 44)
* Foamed polyethylene or its equivalent is recom-
mended.
WARNING
Risk of Electric Shock
Do not supply power to the
unit or operate it until all
tubing and wiring to the
outside unit are completed.
Co
n
de
ns
atio
n
I
nsu
latio
n
material
(Locally p
u
rcha
s
ed)
m
us
t be
us
ed.
Fig. 44
Push
Fig. 42
Slant
Drain
hose
Indoor
unit
Fig. 43
4. Multiple Switch on the Remote Control Unit
Indoor Unit Types
(SAP-KRV184EH, KRV244EH)
(SAP-KRV186EH, KRV246EH)
(SAP-KRV96EHDS)
S/M (Single/Multiple switch)
G
Initially, the S/M switch is set to S (Single).
G
Set this switch to M (Multiple) for multiple operation.
G
Always press ACL button by a thin object such as the tip of a
pen after setting the S/M switch.
ACL
b
utton
G
Slide the cover in the direction indicated
by the arrow and remove it.
G
Use a thin object such as the tip of a
pen to press the ACL button.
07-370 CMRV3146EH_IU ENG 2/6/08 1:31 PM Page 19
