6
OI-332-06EG
OPERATION STANDBY TIMER
ON
OFF
TEST
OPERATION lamp
TIMER lamp
Operation selector
REMOTE CONTROL
receiver
INDOOR UNIT
STANDBY lamp
IMPORTANT
Unit Display and Operation Selector
REMOTE CONTROL
This section picks up infrared signals from the remote control
receiver
unit (transmitter).
Operation selector
ON position
This position is for operating the air conditioner with the wireless
remote control unit.
Set the selector normally in this position.
OFF position
Switch the selector to the OFF position if you are not going to use
the air conditioner for a few days or longer.
The OFF position does not disconnect the power. Use the main
power switch to turn off power completely.
TEST position
This position is used only when servicing the air conditioner.
Do not set at the TEST position for normal operation.
OPERATION lamp
This lamp lights when the system is in the continuous AUTO,DRY
COOL and HEAT mode.
STANDBY lamp
This lamp lights during the warm up period for heating and when
the system is defrosting. To keep a constant room temperature,
the air conditioner continues to supply a gentle breeze during
warm up or when the heating operation is interrupted by the
thermostat.
TIMER lamp
This lamp lights when the system is being controlled by the timer.
Avoid using radio equipment
such as mobile phone near
(within 1 of m) the indoor unit.
Some radio equipment may
cause the unit to malfuction.
If the trouble occurs, disconnect
power and restart the air
conditioner after a few minutes.
CAUTION
K-181AHA P01~P10 (ENG)
10/16/00, 5:16 PM
6
