Sanyo RL-4930, Руководство пользователя

Страница: 201 / 297

Section 2J: Using Sprint PCS Ready Link 193
Receiving a Sprint PCS Ready Link Call
To receive a Sprint PCS Ready Link call:
1.
Make sure your phone’s Sprint PCS Ready Link mode is
enabled (see “Setting Sprint PCS Ready Link Mode”on
page 184).
2.
When you receive a Sprint PCS Ready Link call from a
contact, “R-Link Call:”the contact’s name, and the
Sprint PCS Ready Link number appear on the display.
(You do not need to take any action to answer the call.)
When you receive a group call, “Group Call:”the
group member’s name, and the Sprint PCS Ready
Link number appear.
If nobody takes the floor for 20 seconds, the call will
be a missed Ready Link call.
3.
If the person placing the call has kept the floor (held the
Ready Link/Recorder button), you will see the contact
name and Sprint PCS Ready Link number along with
“has floor,”and you will hear the caller speaking.
4.
When the caller finishes speaking and releases
"
, you
will see “Floor is open.”on the display screen. Press and
hold
"
to take the floor and reply to the caller. (You will
see “You have floor.”and hear a tone confirming that you
may speak.)
5.
When the conversation is finished, press
E
.
Note:
You can change the volume and the speaker setting while a
Sprint PCS Ready Link call is activated. Volume : Adjust the voice volume by
using the Side Volume key or by pressing the navigation key up or down
except when you are pressing and holding the Ready Link button.
Speaker
:
Switch the speaker on or off by pressing the Speaker button (
S
).
Sprin
t
PCS
R
eady
Link