■
Attach the projector to the ceiling bracket
q
Slide the projector bracket attached to the projector over the ceiling bracket attached to the ceiling
as shown in the figure below.
* Be careful not to drop the projector while this process. Although the projector is supported, it
is not secured in place.
3
* Before attaching the Projector bracket to the projector, first read each
Projector bracket (sold separately) Assembly and Installation Manual.
w
Use the fastening plates (x2) and the screws (x4) included with the projector bracket (sold
separately) to attach the projector bracket to the ceiling bracket, and be sure to securely tighten the
screws.
To prevent the projector from falling
* To prevent the projector from falling, use the securing wires included with the projector
bracket (sold separately), etc., after carefully reading the Assembly and Installation Manual.
ネジ(M6×12mm)
ばね座金と平座金組込み
十字穴付き六角ボルト
ネジ(M6×12mm)
ばね座金と平座金組込み
十字穴付き六角ボルト
固定板
固定板
ネジ(M3×8mm)
ばね座金組込み
十字穴付きナベ小ネジ
ネジ(M3×8mm)
ばね座金組込み
十字穴付きナベ小ネジ
Screw (M6 x 12mm)
Phillips head hex bolt with integrated
spring washer and flat washer.
Fastening plate
Screw (M3 x 8mm)
Phillips head machine screw with integrated
spring washer.
Screw (M6 x 12mm)
Phillips head hex bolt with integrated
spring washer and flat washer.
Screw (M3 x 8mm)
Phillips head machine screw
with integrated spring washer.
Fastening plate