Sanyo PLV-Z3000 Скачать руководство пользователя страница 85

Страница: 85 / 134

- 85 -

Indicators

Projector Condition

POWER

red/green/

orange

WARNING

red

LAMP

REPLACE

yellow

The Main On/Off switch is off or the AC power cord is unplugged.

The projection lamp is being cooled down. The projector cannot be turned on

until cooling is completed.

The projector is ready to be turned on with the POWER ON/STAND-BY button.

The projector is operating normally.

The projector is in the Power management mode.

The temperature inside the projector is abnormally high. The projector cannot

be turned on. When the projector is cooled down enough and the tempera-

ture returns to normal, the POWER indicator emits red light and the projector

can be turned on. (The WARNING indicator keeps blinking.) Check and clean

the air filters.

The projector has been cooled down enough and the temperature returns to

normal. When turning on the projector, the WARNING indicator stops blinking.

Check and clean the air filters.

The projector detects an abnormal condition and cannot be turned on.

Unplug the AC power cord and plug it again to turn on the projector. If the

projector is turned off again, unplug the AC power cord and checkup.

Check the power lines. (Power failure)

The lamp does not turn on because malfunction occurs or the lamp reaches

its end of life.

The automatic slide shutter is not working property.

Check the indicators for projector condition.

• • • green

• • • red

• • • off

• • • blinking green

When the life of the projection lamp draws to an end, the LAMP REPLACE indicator lights yellow. When this indica-

tor lights yellow, replace the projection lamp with a new one promptly. Reset the lamp replacement counter after

replacement of the lamp.

Indicators and Projector Condition

• • • blinking red

Troubleshooting

• • • blinking orange

• • • blinking yellow

Содержание PLV-Z3000







































































































































Результаты поиска

Содержание PLV-Z3000

Отзывы:

Похожие инструкции для PLV-Z3000

Бренды по названию

Популярные бренды

Sanyo PLV-Z3000, Руководство по обслуживанию

Результаты поиска

Содержание PLV-Z3000

Отзывы:

Похожие инструкции для PLV-Z3000

Бренды по названию

Популярные бренды