Sanyo PLV-Z2, Руководство по обслуживанию

Страница: 26 / 80

-26-
■
Adjustment
Caution :
Other adjustment items are not related to service and a maintenance. Don't press the POINT (L) and (R) button
at the time of those adjustment items. Otherwise it may cause loss of product safety.
■
ELECTRICAL ADJUSTMENTS
2. Signal Center Adjustment
Equipment Digital voltmeter.
Input mode Input 2 [RGB Analog]
Input Signal 16 step gray scale signal
Enter the Service mode.
Adjust below values of each test points by the POINT L or
R button.
Item no. Test Point Adjustment value
1 TPV1R 6.5 ± 0.05 V-DC.
2 TPV1G 6.5 ± 0.05 V-DC.
3 TPV1B 6.5 ± 0.05 V-DC.
[Adjustment Condition]
●
Input signal
Video signal .......................... 1.0Vp-p/75
Ω
terminated, 16 steps gray
scale, white 100% and white 50% pat-
tern (Composite video signal)
Computer signal .................... 0.7Vp-p/75
Ω
terminated, 16 steps gray
scale pattern (SVGA)
Component Video signal........ 0.7Vp-p/75
Ω
terminated, 16 steps gray
scale, white 100% and black 0% pattern
(480i format and 480p format)
●
Picture control mode ................ “STANDARD” mode unless otherwise
noted.
Note: Please refer to “Service Adjustment Menu Operation” for entering to the service mode and adjusting the ser-
vice data.
White 100%
Black 100%
16 steps gray scale pattern
1. Fan Minimum Voltage Adjustment
Equipment Digital voltmeter
Adjustment Value 3.5 ± 0.05 V-DC
Enter the Service mode.
Adjust values of below items by the POINT L or R button.
Item no. Fan Location Test Point
100 FN901 TPFAN1
101 FN902 TPFAN2
102 FN903 TPFAN3
103 FN904/5 TPFAN4
3. Reference Adjustment
Equipment Oscilloscope
Input mode Input 2 [RGB Analog]
Input Signal 16 step gray scale signal
Enter the Service mode.
Adjust the amplitude of part A to be below value for each
test point by the POINT L or R button.
Item no. Test Point Adjustment value
10 TP35R 10.0 ± 0.1 Vp-p
11 TP35G 10.0 ± 0.1 Vp-p
12 TP35B 10.0 ± 0.1 Vp-p
A
4. Pedestal Adjustment (PC & Component)
Equipment Oscilloscope
Input Signal 16 step gray scale signal
4-1 Input mode Input 2 [RGB Analog]
4-2 Input mode Input 2 [Component: 480p]
Enter the Service mode.
Adjust the level of Black and pedestal to be same for each
test point by the POINT L or R button
in each mode .
Item no. Test Point
203 TP35R
204 TP35G
205 TP35B
Pedestal Level = Black Level