Sanyo PLC--XP200L страница 76 Скачать руководство пользователя

Страница: 76 / 88

The projector is detecting abnormal condition .

Indicators

Projector Condition

POWER

green

LAMP/

SHUTTER

red/blue

WARNING

TEMP.

red

WARNING

FILTER

orange

LAMP

REPLACE

orange

The temperature inside the projector is elevated close to the

abnormally high level.

The temperature inside the projector is abnormally high. The

projector cannot be turned on. When the projector is cooled

down enough and the temperature returns to normal, the

POWER indicator lights green and the projector can be turned

on. (The WARNING TEMP. indicator keeps blinking.) Check and

replace the filter.

The projector has been cooled down enough and the

temperature returns to normal. When turning on the projector,

the WARNING TEMP. indicator stops blinking. Check and

replace the filter.

The lamp cannot light up. (The projector is preparing for stand-

by or the projection lamp is being cooled down. The projector

cannot be turned on until cooling is completed.)

The lamp cannot light up. (The lamp has been cooled down

enough and the projector is in stand-by mode and ready to be

turned on with the ON/STAND-BY button.)

The lamp has been used overtime. Replace the lamp

immediately and then reset the lamp counter. The indicator

will be turned off after resetting the counter.

When the filter detects clogging, reaches a time set in the timer setting or runs out of the filter scroll, the WARNING

FILTER indicator lights orange. When this indicator lights orange, replace the filter or the filter cartridge with a new one
promptly. Reset the Filter counter and Scroll counter after replacing the filter cartridge (p.63).

✽

Appendix

✽

When the projection lamp reaches its end of life, the LAMP REPLACE indicator lights orange. When this indicator lights

orange, replace the projection lamp with a new one promptly. Reset the lamp counter after replacing the lamp (p.65).

WARNING FILTER

LAMP REPLACE

✽

❖

✽

Содержание PLC--XP200L

























































































Результаты поиска

Содержание PLC--XP200L

Отзывы:

Похожие инструкции для PLC--XP200L

Бренды по названию

Популярные бренды

Sanyo PLC--XP200L, Руководство пользователя

Результаты поиска

Содержание PLC--XP200L

Отзывы:

Похожие инструкции для PLC--XP200L

Бренды по названию

Популярные бренды