Sanyo PLC-XE33, Руководство по обслуживанию, Страница: 44 / 110

-44-
Electrical Adjustments
Group/
Item
Item Name Function Initial range Note
7 DIMMER_CTRL_LEVEL8
Luminance Level 8 Data for Dimmer:
Dim Level 8 at the less than the Value
56 0-55
8 DIMMER_CTRL_LEVEL9
Luminance Level 9 Data for Dimmer:
Dim Level 9 at the less than the Value
6 0-55
9 DIMMER_CTRL_LEVEL10
Luminance Level 10 Data for Dimmer:
Dim Level 10 at the less than the
Value
70 0-55
10 DIMMER_CTRL_LEVEL11
Luminance Level 11 Data for Dimmer:
Dim Level 11 at the less than the
Value
77 0 - 55
11 DIMMER_CTRL_LEVEL1
Luminance Level 1 Data for Dimmer:
Dim Level 1 at the less than the
Value
84 0 - 55
1 DIMMER_CTRL_LEVEL1
Luminance Level 1 Data for Dimmer:
Dim Level 1 at the less than the
Value
91 0 - 55
1 DIMMER_CTRL_LEVEL14
Luminance Level 14 Data for Dimmer:
Dim Level 14 at the less than the
Value
98 0 - 55
14 DIMMER_CTRL_LEVEL15
Luminance Level 15 Data for Dimmer:
Dim Level 15 at the less than the
Value
105 0 - 55
15 DIMMER_AVERAGE_POINT
Luminance Data Avarage Point for
Mimmer
4 0 - 16
16 DIMMER_AVERAGE_DATA
Luminance Data Avarage Value for
Dimmer
- - * Read only
17 DIMMER_LEVEL_AUTO Current Dimmer Leverl - - * Read only
18 DIMMER_LEVEL_NORMAL Normal Dimmer Level 7/11/11 0 - 15
19 DIMMER_LEVEL_ECO Eco Dimmer Level 0 0 - 15
0 Lamp check enable 0
0: Lamp Failure Detection OFF
(White 50% Back), 1 : ON (Blue
100% Back)
1 VOLTAGE_LEVEL Lamp Voltage - Unit: 8bit(Raw Data) * Read only
DIMMER_LEVEL_HIGH Dimmer level High 15 0 - 15
Past Calculation System - -
4 New APL System - -
5 Red Average Level - -
6 Green Average Level - -
7 Blue Average Level - -
9 SAT - -
9 Chroma Coefficient 160 0-55
Group
231
VBI Slice level
0 Generic Initial Slicing Level PW190 register 0xE44 0x4 0-55
1 Generic High Level Threshold PW190 register 0xE45 -- 0-55
Generic Low Level Threshold PW190 register 0xE46 -- 0-55
Generic Minimum Low Level PW190 register 0xE47 0x0 0-55
4 Generic Maximum High Level PW190 register 0xE48 0xe0 0-55
Group
250
FAN control
0 FAN1 MIN ADJUST (DAC)
DAC Output for Fan
Adjust the tolerance of DAC and Fan
Volage.
* Lamp mode is forced Eco
8 0 - 55
1 FAN1 MAX ADJUST (DAC) 0 - 55
FAN MIN ADJUST (DAC) 8 0 - 55
FAN MAX ADJUST (DAC) 0 0 - 55
4 FAN MIN ADJUST (DAC) 18 0-55
5 FAN MAX ADJUST (DAC) 40 0-55
6 Not used
7 Not used
8 Href
100 0 - 9999
9 Vref 00 0 - 999
Group
251
Not used
Group
252
FAN option
0 HI-LAND SWITCH
0: Normal, 1: Hi-Land, -4: Hi-Land
1-
0 0 - 5
1 SAFETY SWITCH For test purpose 0 0 - 6
FAN MANUAL SWITCH 0: Auto, 1: Manual 0 0 -
FAN1 MANUAL VOLTAGE
Fan Voltage (unit : 0.1V)
Effective only when Fan Manual
switch is 1
100 0 - 55
4 FAN MANUAL VOLTAGE 100 0 - 55
5 FAN MANUAL VOLTAGE 100 0 - 55