1
Positioning the Projector
Installation
For projector positioning, see the figures below. The projector should be set perpendicularly to the plane of the
screen. The projector will focus at distance from 2.09' to 3.93' (63.6cm to 119.7cm).
Note:
•
This projector is not equipped with an optical zoom. To adjust the screen size, change the throw distance.
• The brightness in the room has a great influence on picture quality. It is recommended to limit ambient
lighting in order to obtain the best image.
• All measurements are approximate and may vary from the actual sizes.
ā
ā
ā
$
3.93' (119.7 cm)
2.83’ (86.1 cm)
2.09’ (63.6 cm)
(Inch Diagonal)
Screen Size
(W x H) mm
16:10aspect ratio
60”
80”
110”
1292 x 808
1723 x 1077
2369 x 1481
Throw distance 2.09’ (63.6 cm) 2.83’ (86.1 cm) 3.93' (119.7 cm)
A
7.9” (20.0 cm)
9.7” (24.5 cm)
12.3” (31.3 cm)
Adjustable Feet
Projection angle can be adjusted up to 10.0 degrees with the
adjustable feet.
Rotate the adjustable feet and tilt the projector to the proper
height; to raise the projector, rotate the both feet clockwise.
To lower the projector or to retract the adjustable feet, rotate
the both feet counterclockwise.
To correct keystone distortion, press the KEYSTONE button
on the remote control or select Keystone from the menu (see
pages 11, 23, 46).
Adjustable Feet
Содержание PLC-WL2501
Страница 78: ...KJ8AC ...