Sanyo PLC-SU25, Руководство пользователя

Страница: 15 / 48

15
BEFORE OPERATION
To insure safe operation, please observe the following precautions :
●
Use (2) AA, UM3 or R06 type alkaline batteries.
●
Replace two batteries at the same time.
●
Do not use a new battery with a used battery.
●
Avoid contact with water or liquid.
●
Do not expose the Remote Control to moisture, or heat.
●
Do not drop the Remote Control.
●
If a battery has leaked on Remote Control, carefully wipe case clean and install new batteries.
●
Risk of explosion if battery is replaced by an incorrect type.
●
Dispose of used batteries according to the instructions.
Press lid down-
ward and slide it.
Remove the battery
compartment lid. Slide the batteries
into compartment. Replace the compartment lid.
Two AA size batteries
For correct polarity (+ and
–), be sure battery
terminals are in contact
with pins in compartment.
REMOTE CONTROL BATTERIES INSTALLATION
1 2 3
Operating Range
Point the Remote Control toward
projector (Infrared Remote
Receiver) whenever pressing any
button. Maximum operating
range for Remote Control is about
16.4’ (5m) and 60° in front and
rear of the projector.
16.4’
(5 m)
60°
16.4’
(5 m)
Used to operate P-TIMER
function. (P21)