Sanyo PLC-EF60A, Руководство по обслуживанию

Страница: 33 / 184

- 33 -
Optical Adjustment
Blue band Yellow band Blue band
Yellow band
z
Integrator-in angle adjustment
Condition: Lamp 2 Mode
(Menu: Setting -> Lamp -> Mode -> 1-Lamp -> Lamp 2)
1
Remove a shutter assy from the optical unit and disconnect the FPC
cables of the panels.
2
Turn the projector on with Lamp 2 mode.
3
Loosen 2 screws
A
and on the integrator-out and 2 screws
C
on the
integrator-in (Fig1-1 and Fig1-2).
4
Insert a slot screwdriver into the slot-
B
on the integrator-out and dis-
play the color band on the top and bottom of the screen by turning
the screwdriver as shown in Fig,1-1.
5
Insert a slot screwdriver into the slot-
D
on the integrator-in and dis-
play the color band on the left and right of the screen by turning the
screwdriver as shown in Fig,1-2.
6
Tempolarily tighten screws
C
and loosen 2 screws
E
on the Integra-
tor-in and turn the Integrator-in left or right by usind the shadow part
of the holder until the edge of the color band becomes clearest.
7
Tightem screws
A
,
C
and
E
to fix the Integrator-in and out unit.
Eddge becomes clear
Blue band
Yellow band
Fig.1-1
Fig.1-2
(Target screen image)
A
B
A
E
E
C
D
C
Integraror-In
Integraror-Out