Sanyo PDG-DXL2000E, Руководство по обслуживанию, Страница: 11 / 98

-11-
This projector provides security functions such as "PIN code lock" and "Logo PIN code lock". When the projector has
set these security function on, you are required to enter correct PIN code to use the projector. If you do not know the
correct PIN code to the projector, the projector can no longer be operated or started. In this case, you must reset those
function first according to the resetting procedure described below and then check up on the projector.
Security Function Notice
Function Description
PIN code lock
Prevents the projector from being operated by an unau-
thorized person.
Initial code: “1234”
Logo PIN code lock
Prevents an unauthorized person for changing the start-
up logo on the screen.
Initial code: “4321”
Resetting procedure
1
Disconnect the AC power cord from the AC outlet.
2
As pressing the
SELECt
button, connect the AC power cord into an AC outlet again.
3
Keep pressing the SELECt button and then press the ON/StAND-BY button.
4
Release the ON/StAND-BY button first and then release the SELECt button.
- The PIN code lock and Logo PIN code lock will be reset as the initial PIN code at the factory.
Please refer to the owner's manual for further information of the security functions.