Sanyo LED-46XR123D, Инструкция по эксплуатации

Страница: 21 / 37

Adjusting the Picture
Adjusting the picture
To adjust the picture:
1
Press
6 5
to highlight an option, press
3 4
to adjust the option;
If a sub-menu exits, press 4 or OK to access. You can select:
Press MENU . The on-screen menu opens with the PICTURE
menu displayed, then press
6
to access.
!
!
!
!
!
!
!
!
!
)
!
!
!
!
!
Picture Mode — Selects the picture mode. You can select:
. Dynamic (a bright and vivid picture,
recommended for store use. When the TV is powered on in this picture mode, a reminder
appears)
. Standard (a standard picture)
. Soft (a soft picture)
. User (user customized picture).
Note: You can also make use of Quick menu to select the picture mode by pressing Q.TOOL button.
Contrast — Adjusts the contrast.
Brightness — Adjusts the brightness.
Colour — Adjusts the colour saturation.
Sharpness — Adjusts the sharpness.
Tint — Adjusts the image tint. (Only for NTSC system)
Backlight — Sets the overall brilliance of the screen.
Colour Temperature — Selects the colour temperature. You can select Warm (to enhance the reds), Cool (to
enhance the blues), or Normal .
Aspect Ratio — Selects the aspect ratio of the picture. You can select:
. 16:9 — Shows a full-screen picture in 16:9 mode.
. 4:3 — Shows picture in 4:3 display mode. (Recommended not let TV remain in this mode for extended period of
time as to protect the screen.)
. Auto — Selects the correct aspect ratio automatically. ( Note: In Component mode, due to technology limited, for
480i/p,576i/p "16:9" signal, please select "16:9" aspect ratio manually
. Zoom1 — Enlarges the picture vertically.
. Zoom2 — Enlarges picture both horizontally and vertically.
.
1:1 pixel mapping
(D-SUB, HDMI, Component only)
— Displays an input source without scaling it (This option is
available when native resolution is 1920x1080 and input resolution is 1920 x 1080p)
Note: You can also press ZOOM to select the aspect ratio.
Noise Reduction — Selects the noise reduction mode to reduce picture noise (snow). You can select Low, Middle,
High, or Off .
Overscan (D-SUB,HDMI only) — Turn this On to adjust the picture’s reproduction rate (available when the TV’s
aspect ratio is in 4:3 or16:9 and the input signal is in video format).
Adaptive Contrast — Turn this On to optimize the picture display for a more vivid image.
HDMI Black Level (HDMI only) — Selects the black level on the screen. Select Low for darker screen, Normal
for brighter screen. (Available when RGB signal is input through HDMI jack).
Screen (D-SUB only) — Adjusts the computer image.
2
Press the FRZ/MIX button to freeze the image on the screen
(
the video sources still run
).
Press again to restore
.
Freezing the picture
Note :
!
,
remain visible
.
Therefore do not freeze the picture for a long time.
!
In some mode, the FREEZE function can not work.
If a fixed image is displayed on the screen for a long time that fixed image may become imprinted on the screen and
21
Picture Mode User
Contrast
75
Brightness 45
Sharpness 50
Colour
50
Tint 50
PICTURE SOUND TIME OPTION LOCK CHANNEL
Select Move
MENU
Return