Sanyo LED-46XR123D, Инструкция по эксплуатации

Страница: 10 / 37

10
TV REAR
Power Connection
Connecting Headphones
TV Side
Connecting a USB device
To USB port
TV Side
A
V
I
N
V
ID
E
O
A
U
D
IO
L
R
H
D
M
I
3
U
S
B
S
/P
D
IF
Antenna Connection
· Connect one end of your antenna cable to the RF jack on the back of
the TV, then connect the other end of the cable to the antenna wall
jack.
Connections
=
When connecting an external device to the TV, make sure that the TV and the device are turned off.
=
Check the plugs on the ends of cables to make sure that they are the correct type before you try plugging them into jacks
on the TV.
=
Make sure that all plugs are securely inserted into the jacks. Loose connections can result in image or color problems.
=
The illustration of the external device may be different depending on your model.
=
Refer to the operating manual of the external device as well.
Cautions Before Connecting
Note:
=
It is recommended that the 75-ohm coaxial cable be used to eliminate
interference and noise which may occur due to radio wave conditions.
=
The antenna cable should not be bundled with the power cord and the like.
=
If the antenna is not installed properly, contact your dealer for assistance.
75-ohm coaxial cable
(round cable)
Connect the power cable from the back of the TV to a power outlet.
Note:
=
This product should be operated only from the type of power source indicated
on the marking label.
=
Always unplug the AC cord from power outlet when not using for a long period
of time.
=
This illustration is for reference only. The AC plug may be different on different
models.
Insert the plug of the headphone into the TV’s Headphone jack.
When using headphones, adjust the headphone volume so as to avoid
excessive levels, as hearing damage may result.
Insert your USB device into the USB port. For the USB device with
greater length which can not be directly inserted into the USB
port, please use a USB cable for connection.
To play from the USB device:
1. Turn on your TV, then press INPUT button. The Input Source menu
opens.
2. Press
5
or
6
to select USB , then press OK to confirm.
Never remove the USB device or turn off the TV while using the USB device.
To connect headphones:
Headphones
AC cord
Household
power outlet