Sanyo LED-32XR10FH, Инструкция по эксплуатации

Страница: 11 / 38

MUSIC/AUDIO D-Sub
RS-232 HDMI 1 HDMI 2 PC IN
Connecting Headphones
Insert the plug of the headphone into the TV’s Headphone jack.
When using headphones, adjust the headphone volume so as to avoid
excessive levels, as hearing damage may result.
TV Side
Connecting a USB device
To USB port
Insert your USB device into the USB port.
To play from the USB device:
1. Turn on your TV, then press SOURCE button. The Input Source
menu opens.
2. Press
5
or
6
to select USB , then press OK to confirm.
Never remove the USB device or turn off the TV while using the USB device.
Connections
(Continued)
To connect headphones:
Connecting a digital sound system
S / PDIF IN
(Coaxial)
Coaxial
cable
For a full Home Theater sound experience
,
you must connect your
digital sound system to the S
/
PDIF OUT
(
Coaxial
)
terminal on the TV
rear
.
Note:
!
The S/PDIF OUT jack only can output digital TV program’s
audio.
!
The headphone output and S/PDIF OUT share the same jack.
So when you want to use S/PDIF, please disconnect your
headphone, and vice versa.
Digital sound system
11
Headphones
TV Side
TV Side
Connecting a MP3 player
TV Rear
Insert MP3 player headphone plug into the MUSIC jack on the back of
the TV. Be sure to insert fully, otherwise it may not sound right.
1. Turn on your TV, then press SOURCE button. The Input Source
menu opens .
2. Press 5 or 6 to select Music , then press OK to confirm.
3. Turn on your MP3 player and begin playing music. Refer to the
instructions that came with the MP3 player.
To listen to music from MP3 player through TV
MP3 player
Or