- 22 -
HEC-DR8700
Stiffness Sensor/Air-Bag Operation Confirmation Procedure
Turn ON the POWER switch at the rear of the massager while simultaneously pressing the
ROLLER POSITION "UP" and "DOWN" buttons and "STRETCH" button on the remote controller
(This operation should be started with the POWER switch turned OFF).
When the examination mode is started up, the back rest, foot rest and seat move to their
home position and come to a stop. (The back rest, foot rest and seat do not move when they
are already at the home position.)
Start-up of Examination Mode
The "Grip the Sensor" on the remote control will be turned off and the "AUTO " will be
illuminated when the sensor controller is being gripped while touching with your fingers
(hand) at the sensor points.
The "Grip the Sensor" on the remote control will be illuminated
if your fingers (hand) are not placed on the sensors.
* If there are any problems, find out the problems and repair.
To remove the examination mode, turn OFF the POWER switch.
Stiffness Sensor Operation Confirmation
Press either " (UP)" or " (DOWN)" button of the LOWER BODY adjustment on the
remote controller.
Check if the air-bag inflates sequentially as shown below.
* If there are any problems, check air leakage, breakage of air hoses, and the air-bag.
Air-Bag Operation Confirmation
1, Foot pinching, outside
2, Foot pinching, inside
3, Foot shiatsu, middle
4, Foot shiatsu, back and forth
5, Ankle pinching
6, Leg pinching, inside and outside
7, Leg shiatsu
9, Waist and Seat, left
8, Waist and Seat, right
Sensors
Rear of sensor controller
display
ROLLER POSITION "UP" and "DOWN" buttons and "STRETCH" button
POWER switch "ON"
(Simultaneously press)
LOWER BODY adjusting button
5
8
9
9
8
5
7
7
6
6
6
6
4
1
1
3
3
2
2
4
4
4
