Sanyo FWDP175F, Руководство пользователя

Страница: 9 / 24

– 9 –
EN
Audio
This unit
Analog Audio Connection
AUDIO OUT
Audio cable (supplied)
Connection to an Audio System
Supplied cables used in this connection are as follows:
• Audio cable (L/R) × 1
Please purchase the rest of the necessary cables
at your local store.
Digital Audio Connection
Stereo system with Analog Audio Input jacks
Analog Audio
Input jacks
HDMI Audio
Media Audio Recording Format
“Audio Out” Setting
“Bitstream” “PCM”
DVD-Video
Dolby Digital Dolby Digital 2ch PCM
DTS DTS Mute
MPEG 2ch PCM 2ch PCM
LPCM 2ch PCM 2ch PCM
audio CD 2ch PCM 2ch PCM 2ch PCM
DTS-CD DTS DTS Mute
HDMI Mode and Actual Output Signals
You can change the resolution of the video signal being output from the HDMI OUT in “SYSTEM“ menu. (Refer to page 17.)
Copyright protection system
To play back the digital video images of DVD-video via an HDMI connection, it is necessary that both the player and the display device (or
an AV receiver / amplifier) support a copyright protection system called HDCP (high-bandwidth digital content protection system). HDCP
is copy protection technology that comprises data encryption and authentication of the connected AV device. This unit supports HDCP.
Please read the operating instructions of your display device (or AV receiver / amplifier) for more information.
Note:
• When using HDCP-incompatible display device, the picture will not be viewed properly.
• The audio signals from the HDMI jack (including the sampling frequency, the number of channels and bit length) may be limited by
the device that is connected.
• Among the display device(s) that support HDMI, some do not support audio output (for example, projectors). In connections with
device such as this unit, audio signals are not output from the HDMI output jack.
• When this unit’s HDMI jack is connected to a DVI-D compatible display device(s) (HDCP compatible) with an HDMI-DVI converter
cable, the signals are output in digital RGB.
• When you make a selection, the TV monitor temporarily goes blank and then comes back again. If it does not, press and hold
[
BF
(PLAY / PAUSE) ]
on the front panel for 5 seconds to change the setting of the resolution back to its default.
HDMI IN
HDMI OUT
HDMI cable
(not supplied)
AV receiver / amplifier with an HDMI input jack
HDMI input jack