– 17 –
EN
A
System Setting
You can change the Display functions. Follow steps 1 and 2 on page 16.
3
Select the desired item.
ENTER
LANGUAGE
AUDIO
VIDEO
OTHER
TV Aspect
4:3 Pan & Scan
Resolution
4:3 Letterbox
HDMI CEC
16:9 Widescreen
16:9 Squeeze
SYSTEM
<SYSTEM menu>
4
TV Aspect: (Default: 16:9 Widescreen)
Sets the aspect ratio of the playback image to fit your TV.
See the note on the right.
5
To Exit the Menu
TV Aspect
4:3 Pan & Scan
Resolution
4:3 Letterbox
HDMI CEC
16:9 Widescreen
16:9 Squeeze
Select the Desired
Setting.
Note(s):
TV Aspect:
•
Select “4:3 Pan & Scan”
for a full height picture
with both sides adjusted.
•
Select “4:3 Letterbox”,
black bars may appear on
the top and bottom of the
TV screen.
•
Select “16:9 Widescreen”
if a wide-screen TV is
connected to this unit.
•
Select “16:9 Squeeze”
to display 4:3 aspect ratio
in the center of the 16:9
screen when playing back
4:3 images.
Resolution:
– Auto:
HDMI video resolution
will be selected
automatically depending
on the connected HDMI
device.
•
When you make a
selection, the TV monitor
temporarily goes blank
and then comes back
again. If it does not, press
and hold
[
BF
(PLAY /
PAUSE) ]
on the front
panel for 5 seconds to
change the setting of
the resolution back to its
default.
Resolution: (Default: Auto)
You can select the desired “Resolution” among the
settings.
See the note on the right.
TV Aspect
Auto
Resolution
480P
HDMI CEC
720P
1080i
1080P
HDMI CEC: (Default: Off)
HDMI CEC allows integrated system control over HDMI.
See the note below.
TV Aspect
On
Resolution
Off
HDMI CEC
Note:
HDMI CEC:
•
HDMI CEC allows integrated system control over HDMI and is part of the HDMI standard.
This function may not work properly depending on the device connected to the unit.
When “HDMI CEC” setting is set to “On” the functions listed below will be available.
▪
One Touch Play
When the buttons below on the remote control are pressed then operations are performed on this unit, the TV will
automatically be turned on and switched to the appropriate video input.
Buttons for one touch play:
- [PLAY
B
]
,
[SKIP
H
,
G
]
,
[DISPLAY]
,
[SETUP]
- [TOP MENU]
, or
[MENU]
(when a disc is inserted in the unit)
▪
One Touch Standby
When you press and hold
[STANDBY-ON]
for 2 seconds, it turns off the TV first and then turns off this unit.
When the connected fun-Link (HDMI CEC) compatible display device is turned off first, it then turns off the power to this
unit.
▪
System Information
Get & Set Menu Language
The unit recognizes the OSD language set on the TV and automatically sets the same language as the on-screen language in
“Menu“ setting.
Feature is available only when “Menu” in “LANGUAGE” menu is set to “Auto” while connected via an HDMI cable.
