Connecting antenna or cable / satellite set-top box
Be sure your antenna or another device is connected properly before
plugging in the AC power cord.
If connecting to an antenna through an RF cable
Any DTV programs that are broadcast in your area can be received for
free through an antenna connection.
RF cable
RF cable
RF cable
OUT
IN
IN
IN
Cable
Antenna
If connecting cable / satellite set-top box using an RF cable
If the TV is connected to a cable or set-top box via a coaxial connection,
set the TV to channel 3/4 or the channel specified by the service
provider.
IN
IN
IN
Set-top box
RF cable
RF cable
RF cable
RF cable
IN
IN
IN
Antenna
Antenna
Antenna
OUT
If connecting cable / satellite set-top box using an HDMI
cable
If the TV is connected to a cable / satellite set-top box via an HDMI cable,
make sure you select the correct source by using
SOURCE
.
IN
RF cable
OUT
Set-top box
IN
RF cable
HDMI cable
HDMI cable
HDMI cable
OUT
IN
IN
IN
If connecting cable / satellite set-top box using component
video input
If the TV is connected to a cable / satellite set-top box via component
video input, make sure you select the correct component video source
by using
SOURCE
.
OUT
OUT
Component (Y/Pb/Pr)
video cables
Component (Y/Pb/Pr)
video cables
Component (Y/Pb/Pr)
video cables
Audio (L/R) cables
Audio (L/R) cables
Audio (L/R) cables
Set-top box
IN
IN
IN
IN
IN
IN
IN
RF cable
Connecting a cable / satellite set-top box, Blu-ray
Disc™ / DVD recorder via composite connectors and
analog audio
Do not place your recorder too close to the screen because some
recorders can be susceptible to signals from the TV.
Cable
Set-top box
OUT
OUT
Audio (L/R) +
Video cables
IN
IN
Blu-ray Disc™ / DVD
recorder
Cable
RF cable
RF cable
RF cable
RF cable
RF cable
RF cable
IN
IN
IN
Set-top box
OUT
OUT
OUT
OUT
OUT
OUT
OUT
OUT
Audio (L/R) +
Video cables
Audio (L/R) +
Video cables
Audio (L/R) +
Video cables
Audio (L/R) +
Video cables
IN
IN
IN
IN
IN
Blu-ray Disc™ /
DVD recorder
Note(s)
●
If you have any question about the DTV’s antenna, visit
www.antennaweb.org
for further
information.
●
Depending on your antenna system, you may need different types of combiners
(mixers) or separators (splitters) for HDTV signal. The minimum RF bandpass on these
devices is 2,000MHz or 2GHz.
●
For your safety and to avoid damage to this unit, please unplug the RF coaxial cable from
the antenna input jack before moving the unit.
●
If you did use an antenna to receive analog TV, it should also work for DTV reception. Outdoor
or attic antennas will be more effective than a set-top box or inside antenna.
●
To turn on your reception source easily between antenna and cable, install an antenna
selector.
●
If you are not receiving a signal from your cable service, contact the cable provider.
●
Refer to the Quick start guide that shows the connections for the HDMI or component input
mode.
Plugging in the AC power cord
Make sure all the necessary connections are made before the AC power
cord is plugged into an AC outlet.
Caution(s)
●
Connect the analog audio signal cables from the external device to the analog audio L/R input
jacks.
●
If you have an amplifier, connect the HDMI cable to the HDMI input via your amplifier.
Note(s)
●
Each time you plug in the AC power cord, no operations will be performed for several
seconds. This is not a malfunction.
11
.
English
Continued on next page.
Содержание FW32D08F
Страница 39: ...AZAF6UT 32HL ...
