-E37-
Duplicating a Video Tape
If you connect the VCR to another VCR or camcorder, you can
duplicate a previously recorded tape.
Make all connections before turning on the power.
1. Load a blank cassette tape with the erase prevention tab
intact into the recording VCR.
Load a previously recorded tape into the playback VCR or
CAMCORDER.
2. Press [TAPE SPEED] to select the desired tape speed SP or
SLP.
•
It is recommended that you set the Speed to the SP mode
on the recording VCR for best results.
3. Press [INPUT] to select AUDIO/VIDEO input position.
“L” will appear in the display.
4. Press [REC/OTR] on the recording VCR, then press [
k
].
5. Press the [
a
] button on the playback VCR or CAMCORDER,
then press the [
k
] button.
6. Release the recording pause and the playback still
simultaneously to begin the duplicating process.
Connection with second Video recorder
To AUDIO (R) IN
To VIDEO IN
To AUDIO (L) IN
To AUDIO (R) OUT
To VIDEO OUT
Playback VCR
Recording VCR
To AUDIO (L) OUT
AUDIO/VIDEO Cord (not supplied)
Connection with Video camera
To AUDIO (R) IN
To AV Jack
To VIDEO IN
To AUDIO (L) IN
AUDIO/VIDEO Cord (not supplied)
Recording VCR
Playback Camcorder
For duplicating a previously recorded tape from a camcorder,
follow the camcorder manufacturer’s instructions. A typical
camcorder dubbing hookup is shown above.
Need help? Call
1-800-813-3435
