Sanyo DTL-4800 Скачать руководство пользователя

Страница: 32 / 57

PROGRAM TIMER RECORDING

There are two program timer recording methods, daily
recording or recording on certain days of the week.

Example 1:

To record on every Saturday from 9:00
AM to 5:00 PM (17:00), in H24-hour
mode (recording speed).

Follow the Before starting steps, under “NORMAL
RECORDING”.

Press the MENU button to display the (MAIN MENU
1) menu.

Press the SHIFT

]

button to select the “7. TIMER

SET” line, then press the MENU button.

The (TIMER SET) menu appears.

@@@@@@<TIMER@SET>

WEEK@START@@STOP@@@SPD

SUN@@--:--@@--:--@----@N

MON@@--:--@@--:--@----@N

TUE@@--:--@@--:--@----@N

WED@@--:--@@--:--@----@N

THU@@--:--@@--:--@----@N

FRI@@--:--@@--:--@----@N

SAT@@--:--@@--:--@----@N

DLY@@--:--@@--:--@----@N

EXT@@*****@@*****@----@N

Press the SHIFT

]

(or

) button, until “SAT”

(Saturday) is flashing.

Press the SHIFT

button.

The recording start hour position starts flashing.

Press the DATA

(or

) button to set the recording

start hour (ex: 09), then press the SHIFT

button.

The recording start minutes position starts
flashing.

Press the DATA

(or

) button to set the recording

start minutes (ex: 00), then press the SHIFT

button.

The recording stop hour position starts flashing.

Press the DATA

(or

) button to set the recording

stop hour (ex: 17), then press the SHIFT

button.

The recording stop minutes position starts
flashing.

Press the DATA

(or

) button to set the recording

stop minutes (ex: 00), then press the SHIFT

button.

The “SPD” (recording speed) position will start
flashing.

NOTE:

If the set stop time is earlier than or the same time
as the set start time, the VCR will consider the stop
time to be the following day, and “T” will be
displayed next to the recording stop time.

Press the DATA

(or

) button to select the

recording speed mode (ex: H24), then press the
SHIFT

button.

“N” will start flashing.

Press the DATA

(or

) button to select the desired

program timer recording mode.

Y. . . . . . . . . . Recording will take place

N . . . . . . . . . Recording will not take place

@@@@@@<TIMER@SET>

WEEK@START@@STOP@@@SPD

SUN@@--:--@@--:--@----@N

MON@@--:--@@--:--@----@N

TUE@@--:--@@--:--@----@N

WED@@--:--@@--:--@----@N

THU@@--:--@@--:--@----@N

FRI@@--:--@@--:--@----@N

SAT@@09:00@@17:00@@H24@Y

DLY@@--:--@@--:--@----@N

EXT@@*****@@*****@----@N

Repeat steps

to program timer

recordings for other days of the week.

Press the MENU EXIT button to save the settings.

Press the TIMER button.

The timer recording indicator

“

”

will light on the

digital display, the VCR is now in timer recording
stand-by mode.

NOTES:

To modify, cancel or stop timer recording, press
the TIMER button to cancel the timer recording
mode.

To record everyday at the same time, at step

select the “DLY” line.

To set two or more timer recordings for a same day
of the week, press the SHIFT

]

button,

until the day of the week for the second recording
is flashing, then press the DATA

(or

) button,

to set the desired day of the week.

RD2QD/NA (DTL-4800 GB) Tue. Aug., 08/2000

English

Содержание DTL-4800

























































Результаты поиска

Содержание DTL-4800

Отзывы:

Похожие инструкции для DTL-4800

Бренды по названию

Популярные бренды

Sanyo DTL-4800, Инструкция по эксплуатации

Результаты поиска

Содержание DTL-4800

Отзывы:

Похожие инструкции для DTL-4800

Бренды по названию

Популярные бренды