background image

19

Setting audio

The sound from speakers can reach the listening position at different times
depending on the speaker placements. You can allow for this difference
by changing the delay time of the centre and surround speakers.
You also can change the dynamic range control (DRC).
    1. Press the SETUP button in the stop mode. The setup screen appears.
  2. Press the 

a

 button to select “Audio”, then press the ENTER button.

“Audio” screen appears.

Example:

Audio DRC

Off

Center Delay

0ms

Surr. Delay

5ms

  3. Press the ENTER button to select “Audio DRC”. The submenu (“On”

and “Off”) appears.

  4. Press the 

5

 or 

4

 button to select “On” or “Off” as desired.

On: It will compress the dynamic range. It may have no effect with

some discs.

Off: Sound with a wide dynamic range.

  5. Press the ENTER button. “Audio DRC: On” or “Audio DRC: Off”

remains.

  6. Press the 

5

 button to select “Center Delay”, then press the ENTER

button. The submenu (“0ms”, “1ms”, “2ms”, “3ms”, “4ms” and “5 ms”)
appears.

  7. Press the 

5

 or 

4

 button to select the centre speaker delay time.

Centre speaker delay time
If D1

 D2, set the delay time to “0ms”.

If D1>D2, set the delay time as follows:
Difference between D1 and D2

Delay time

Approx. 30cm

  1ms

Approx. 60cm

  2ms

Approx. 90cm

  3ms

Approx. 120cm

  4ms

Approx. 150cm

  5ms

D1: The distance from the front speaker
D2: The distance from the centre speaker
D3: The distance from the surround speaker.

  8. Press the ENTER button. “Center Delay” and the selected delay time

remain.

  9. Press the 

5

 button to select “Surr. Delay”, then press the ENTER

button. The submenu (“0ms”, “5ms”, “10ms” and “15ms”) appears.

10. Press the 

5

 or 

4

 button to select the surround speaker delay time.

Surround speaker delay time
If D1

 D3, set the delay time to “0ms”.

If D1>D3, set the delay time as follows:
Difference between D1 and D3

Delay time

Approx. 150cm

  5ms

Approx. 300cm

10ms

Approx. 450cm

15ms

11. Press the ENTER button. “Surr. Delay” and the selected delay time

remain.

12. Press the 

4

 button to skip back to the setup screen (or press the

SETUP button).

Setting parental

1. Press the SETUP button in the stop mode. The setup screen appears.
2. Press the 

a

 button to select “Parental”, then press the ENTER button.

“Parental” screen appears.

3. Press the 

5

 button to skip “Password: ----” and select “Level”.

Password

----

Level

Off

4. Press the ENTER button repeatedly to select the parental lock level

(“Level: Off, 1 ~ 8”).

5. Press the 

4

 button to return to “Password: ----”.

6. Enter a number in 4 digits, then press the ENTER button. The

password is now set.

Password

----

Level

1

Note:
If you do not set it, Parental control does not work, and it returns to the
initial settings.

7. Press the SETUP button. The setup screen disappears.

Parental control
MPAA (Motion Picture Association of America) guideline is a rating
system that provides advanced cautionary information to parents about
the content of movie programmes.

The parental lock level is equivalent to the following MPAA rating system.
Level 7: NC-17 (No one 17 and under admitted)
Level 6: R (Restricted)
Level 4: PG13 (Parental guidance cautioned)
Level 3: PG (Parental guidance suggested)
Level 1: G (General audiences)

Some DVD discs contain a restriction level which enables parents to
prevent playback of discs by children. This unit is equipped with a
password designed to prevent children changing the level.

You cannot play DVD discs rated higher than the level you selected unless
you cancel the parental lock function.
For example, when you select level “5”, the unit will not play discs with
ratings of “6”, “7” or “8”. The information will appear on the TV screen.

If you forget the password…
Enter “788444” even if 4 digits “----” appears, then press the ENTER button
to clear the current password. Enter a new password and set the parental
lock level again.

Note:
DVD discs may or may not respond to the parental lock settings. Make
sure this function works with your DVD discs.

Front left speaker

Front right speaker

Centre speaker

Surround left

speaker

Surround right
speaker

D1

D2

D3

D3

D1

Содержание DC-TS750





























Отзывы: