Sanyo DC-DA1200M (XE-2); DC-DA1250M (SP-2), Руководство по обслуживанию

Страница: 8 / 22

- 7 -
PARTS LIST
1 60
2 59
3 58
4 57
5 56
6 55
7 54
8 53
9 52
10 51
11 50
12 49
13 48
14 47
15 46
16 45
17 44
18 43
19 42
20 41
21
80
22
79
23
78
24
77
25
76
26
75
27
74
28
73
29
72
30
71
31
70
32
69
33
68
34
67
35
66
36
65
37
64
38
63
39
62
40
61
FIN1
FIN2
TIN1
TIN2
REFI
DEFECT
ADAVDD
ADAVSS
JITTC
SLCO
EFMIN
SLCIST
PDO1 PDO2 FR PCKIST VVDD VVSS
SBCK/FG
XIN
XOUT
16MOUT
XVDD
XVSS
*RES *WRQ CL CE DI DO VDD5V CONT1 CONT2 CONT3
CONT4 CONT5
SBCK/CONT6
TEST
LVDD
LVSS
LCHO
RCHO
RVDD
RVSS
FE
TE
TEC
RF
RFVDD
RFVSS
RFMON
VREF
LDD LDS
FDO
TDO
SLDO
SPDO
GPD
AC
DRF
FSEQ
V / *P
VDD
(3.3V)VSS
VSS
MONI 1 MONI 2 MONI 3 MONI 4 MONI 5
FSX/16MIN
C2F
EFLG
DOUT
LRSY
DATACK
DATA
ASLRCK
ASDACK
ASDFIN
Pin
No. Pin
No.
Pin Name I/O
Reset
state
Reset
state
Function description
1 SLCO O -
Slice level
control
Control output.
2 SLCIST AI - SLCO output current adjustment resistor connection pin.
3 EFMIN I - RF signal input pin.
4 RF AO - RF monitor pin.
5 RFVDD - - RF power supply pin.
6 RFVSS - - RF ground pin. Must be connected to 0V.
7 FIN1 AI - A+C signal input pin.
8 FIN2 AI - B+D signal input pin.
9 TIN1 AI - E signal input pin.
10 TIN2 AI F signal input pin.
11 VREF AO RFVDD/2 VREF voltage output pin.
12 REFI AI - Reference voltage seting pin.
13 FE AO ZHI FE signal monitor pin.
14 TEC AO - TE signal LPF capacitor connection pin.
15 TE AO ZHI TE signal monitor pin.
16 RFMON AO ZHI RF internal signal monitor pin.
17 JITTC A - Jitter detection capasitor connection pin.
18 ADAVDD - - Servo A/D, D/A supply pin.
19 ADAVSS - - Servo A/D, D/A ground pin. Must be connected to 0V.
20 TDO AO ADAVDD/2 Tracking control output pin. D/A output.
21 FDO AO ADAVDD/2 Focus control output pin. D/A output.
22 SPDO AO ADAVDD/2 Spindle control output pin. D/A output.
23 SPDO AO ADAVDD/2 Thread control output pin. D/A output.
24 GPDAC AO ADAVDD/2 Servo D/A general-purpose output pin.
25 CONT4 I/O Input mode
General-purpose
input / output pin 4.
Controlled by commands
from the microprocessor.
Any of these that are unused
must be either set up as input
pin ports and connected to 0V,
or set up as output pin ports
and left open.
26 CONT5 I/O Input mode
General-purpose
input / output pin 5.
27 SBCK/CONT6 I/O Input mode
General-purpose
input / output pin 6,
or subcode read clock input pin.
28 SBCK/FG I -
Subcode read clock input pin / FG signal input pin /
external emphasis setting pin.
Set to command pin function. Must be connected to 0V.
29 DEFECT O L Defect pin.
30 V / *P O H
Rough servo / phase control automatic switching monitor
output pin.
"H" for rough servo and "L" for phase servo.
31 FSEQ O L
Synchronization signal detection output pin.
Outputs a high level when the synchronization signal
detected
from the EFM signal and the internally generated
synchronization
signal agree.
32 MONI 1 O L Internalsignal monitor pin 1.
33 MONI 2 O L Internalsignal monitor pin 2.
34 MONI 3 O L Internalsignal monitor pin 3.
35 MONI 4 O L Internalsignal monitor pin 4.
36 MONI 5 O L Internalsignal monitor pin 5.
37 (3.3V)VSS - - Digital ground pin. Must be connected to 0V.
Pin Name
I/O Function description
38 VDD - - Digital power supply pin.
39 DOUT O L Digital OUT output pin.
40 TEST I L Test input pin. Must be connected to 0V.
41 LVDD - -
L channel D/A converter
L channel power supply pin.
42 LCHO AO LVDD/2 L channel output pin.
43 LVSS - - L channel ground pin. Must be connected to 0V.
44 RVSS - -
R channel D/A converter
R channel ground pin. Must be connected to 0V.
45 RCHO AO LVDD/2 R channel output pin.
46 RVDD - - R channel power supply pin.
47 XVDD - -
Crystal oscillator
Crystal oscillator power supply pin.
48 XOUT O Oscillator Connections for a 33.8688MHz or 16.9344MHz
49 XIN I Oscillator crystal oscillator pin.
50 FSX/16MIN I/O Input mode
7.35kHz synchronization signal output pin.
DF, DAC external clock input pin.
51 XVSS - - Crystal oscillator Crystal oscillator ground pin. Must be connected to 0V.
52 C2F O H C2 flag output pin.
53 EFLG O L C1, C2 error correction monitor pin.
54 16MOUT O CLK output 16.9344MHz output pin.
55 ASLRCK I
Antishock mode
L/R clock input pin. (Must be connected to 0V when unused)
56 ASDACK I Bit clock input pin. (Must be connected to 0V when unused)
57 ASDFIN I
L/R channel data input pin.
(Must be connected to 0V when unused)
58 LRSY O L
Digital data output
L/R clock output pin.
59 DATACK O L Bit clock output pin.
60 DATA O L L/R channel data output pin.
61 CE I -
Micro
-processor
interface
Chip enable signal input pin.
62 CL I - Data transfer clock input pin.
63 DI I - Data input pin.
64 DO O (H) Data output pin. (Nch open drain output)
65 *WRQ O H Interruption signal output pin.
66 *RES I -
Reset input pin.
This pin must be set low briefly after power is first applied.
67 DRF O L Focus ON detect pin.
68 VDD5V - - Microprocessor interface power supply pin.
69 VSS - - Digital ground pin. Must be connected to 0V.
70 CONT3 I/O Input mode General-purpose output pin 3. Controlled by commands from the microprocessor.
71 CONT2 I/O Input mode General-purpose output pin 2. Must be set as an input pin and connected to 0V
72 CONT1 I/O Input mode General-purpose output pin 1. or set as an output pin and left open when unused.
73 PDO1 O
PLL
Phase comparison output pin 1 to control built-in VCO.
74 PDO2 O Input mode Phase comparison output pin 2 to control built-in VCO.
75 VVSS - - Built-in VCO GND pin. Must always be connected to 0V.
76 PCKIST AI - Resistor connection pin to set current for PD01 and 02 outputs.
77 VVDD - - Built-in VCO power supply pin.
78 FR AI - Resistor connection pin to set the frequency range of built-in VCO.
79 LDS AI - Laser power detection signal input pin.
80 LDD AO - Laser power detection signal output pin.
Note) The same potential must be supplied to all power supply pins, i. e. , RFVDD, VVDD, ADAVDD, VDD, LVDD,
RVDD AND XVDD. Pins operated from the microprocessor interface power supply (VDD5V) pin :
CE(61 pin), CL(62pin), DI(63 pin), DO(64 pin), *WRQ(65 pin), RES(66 pin), DRF(67 pin), CONT1(72 pin),
CONT2(71 pin), CONT3(70 pin)
IC BLOCK DIAGRAM & DESCRIPTION
IC101 LC78646-UHK-E (CMOS LSI for CD Player)
POWER TRANSFORMER P.W.BOARD ASSY
REF.NO. PART NO. DESCRIPTION
76 614 331 7098 ASSY,PWB,DG(Only initial)
CN451 614 017 8203 TERMINAL BOARD
CN452 614 017 8203 TERMINAL BOARD
CN455 645 005 9315 PLUG,2P
L4591 645 038 6053 INDUCTOR,181U
TAPE MECHANISM
REF.NO. PART NO. DESCRIPTION
33 614 309 7976 ASSY,MECHA,TM-DA70TN-SH
614 312 0629 ASSY,MOTOR,FOR SERVICE
645 009 1612 PINCH ROLLER ARM ASSY
645 009 1766 RF BELT
645 033 3415 MAIN BELT
645 041 3025 R.P HEAD
645 033 8625 E HEAD 6PA
or 645 072 9775 E HEAD TC-238