22
Reviewing and deleting directory contents
1. Make sure the phone is OFF (not in TALK mode).
2. Press
MEM
.
3. Use
CID/VOL
or
to scroll through the directory until the
desired name/number is shown, or use the number pad to select a
memory location. The selected telephone number and name show on
screen.
4. While the entry is displayed, press
CH/DEL
to delete the entry. The
screen shows “DELETE?”
5. Press
CH/DEL
again to delete the entry. “DELETED” shows on
screen.
Chain dialing from the directory
Use this feature to make calls that require a sequence of numbers such as
using a calling card for a frequently called long distance number. You can
dial each part of the sequence from a different entry of the directory. The
following example shows how you can use chain dialing to make a call
through a long distance service:
The Number for:
Memory Location
Long distance access number
7
Authorization code
8
Frequently called long distance number
9
DIRECTORY
1. Make sure the phone is in TALK mode.
2. Press
MEM
and then press 7.
3. When you hear the access tone, press
MEM
and then press
8
.
4. At the next access tone, press
MEM
and then
9
.
Tip:
Wait for the access tones before pressing the next memory key,
or your call might not go through.
