background image

15

Handset locator (Paging function)

This feature helps to locate a misplaced handset.

1. Press 

PAGE 

on the base, the screen shows “PAGING”. The handset

beeps continuously for about 2 minutes or until you press any key

on the handset.

2. To stop the paging, do one of the following:

     Press 

PAGE 

on the base.

     Press 

TALK/CALL BACK, 

this will enter talk mode.

     Press any button on the handset.

Note: 

You can still page the handset with the ringer off.

MUTE key

To have a private, off-line conversation, use the MUTE feature. The

caller on the other end of the line cannot hear you, but you can still hear

them.

To mute the microphone:

1. Press 

MUTE

 in TALK mode

The screen shows “MUTE”.

2. Press 

MUTE

 again to return to your phone conversation.

Low battery warning

1. If the battery is low and the phone is in TALK mode, a warning tone

consisting of 2 short beeps will sound from the handset and the LED

will flash every 15 seconds.  “LOW BATTERY” shows on screen.

2. If the battery is low and the phone is in STANDBY mode, the LED

on handset will flash every 15 seconds, and “LOW BATTERY”

shows on screen.

Voice mail indicator

When you subscribe to a voice mail service offered by your phone

company, the phone alerts you when voice mail has been received.

MESSAGE WAITING appears on screen for 60 seconds when a voice

mail is received. The LED on the base flashes to indicate there is a voice

mail waiting. After the voice mail has been reviewed, MSG WAITING

OFF appears on screen, and the indicator stops flashing.

Note:

  The indicator does not work with your answering machine.  The

phone will only work with an FSK type of VMWI System.  It will not

work with the Stutter Dial Tone type of VMWI System.

BASICS

Содержание CLT-J30



































Отзывы: