Sanyo CE42LH2DPB, Инструкция по эксплуатации

Страница: 32 / 33

12
Input
To switch input source from AV1 , RGB , AV2 , AV3 ,
PC , DVI or Network mode.
Standby
To switch the monitor on and off. Also, refer to the
INSTRUCTION MANUAL on page 8.
Menu
7RHQWHUDQGH[LWWKHPDLQPHQXDQGVXEPHQX
Wide
To select the screen mode Full , Full All , Zoom
16:9 , Title in 16:9 , Zoom 14:9 , Title in 14:9 ,
Normal or Natural wide .
Refer to the INSTRUCTION MANUAL on page 12.
Recall
To display input selection information and the Time
set.
You can also select colour systems in AV1/AV3
mode as follows:
AUTO
í
PAL
í
SECAM
í
NTSC
í
NTSC4.43
í
PAL M
í
PAL N .
Auto PC
It can also be automatically adjusted in PC mode
by pressing this button for twice .
Back
Used to return to the previous menu.
Up and Down
7RVHOHFWWKHQH[WRUSUHYLRXVLWHP
Sound Mute
To mute the sound from the speakers.
The sound changes as follows:
Normal volume
Mute .
Bass Expander
To get an emphasised bass sound ON or OFF.
TXT/TV
7RVHOHFW7HOHWH[WPRGH
Main/Sub Picture Swap
To swap Main and Sub picture.
ON/OFF
To switch OFF
í
PIP(1)
í
PIP(2)
í
POP mode
in turn.
Refer to the INSTRUCTION MANUAL on page 13.
Level Up/Down
To adjust the sound volume level or enter sub
menus.
F/OK
7RFRQÀUPWKHLQLWLDOVHWWLQJLQWKHPHQX
Picture mode selector
Press the button repeatedly to select the fol-
lowing picture mode.
Personal - Personal preference mode.
Standard - Normal viewing mode.
Dynamic - Suitable for brightly lit rooms.
Soft - Low contrast setting
Eco - Suitable for dimly lit rooms and gives a cin-
ema-like effect.
)UHH]H
To switch picture still on or off.
Green
Press this button for more than 5 seconds, installa-
tion mode will appear.
Remote control
Remote control battery installation
,QVWDOOWZR´$$µYROWEDWWHULHVVRWKDWWKH´µDQG´²µPDUNVRQWKH
EDWWHULHVPDWFKWKH´µDQG´²µPDUNVLQVLGHWKHXQLWLQWRWKHUHPRWH
control handset.
FOR EU USERS
The symbol mark and recycling systems described below apply to EU
countries and do not apply to countries in other areas of the world.
Your SANYO product is designed and manufactured with high quality
materials and components which can be recycled and/or reused.
The symbol mark means that electrical and electronic equipment,
batteries and accumulators, at their end-of-life, should be disposed of
separately from your household waste.
Note:
If a chemical symbol is printed beneath the symbol mark, this chemi-
cal symbol means that the battery or accumulator contains a heavy
metal at a certain concentration. This will be indicated as follows: Hg:
mercury, Cd: cadmium, Pb: lead
In the European Union there are separate collection systems for used
electrical and electronic equipment, batteries and accumulators.
Please, dispose of them correctly at your local community waste col-
lection/recycling centre.
Please, help us to conserve the environment we live in!
INSTALLATION GB GB