English
- 5 -
Switching The TV ON/OFF
To switch the TV on:
Your TV will switch on in two steps:
1-
Connect the power to 220-240V AC, 50Hz, press
power on/off button. Then the TV switches itself
to stand-by mode (optional).
2-
To switch on the TV from stand-by mode either:
Press a digit button on the remote control so that a
programme number is selected, or Press the "
P-
" or
"
P+
" button on the TV or press the
“ ”
or
“ ”
button on the remote control, so that last mode
switched off is selected.
By either method the TV will switch on. When the TV
is operated for the first time, the following screen
appears:
Auto. Programming System
Language
Country
English
U.K.
Check the antenna cable
For more information on this process, see “
Install
Menu
” section.
To switch the TV off:
• Press the “
(stand-by)” button on the remote con-
trol or stand-by button on the TV, so the TV will
switch to stand-by mode.
To power down the TV completely, unplug the power
cord from the mains socket.
Navigating the Menu System
M
INFO
OK
SELECT
For displaying
menu options
For navigation
To confirm
choices
1-
Press
M to display the menu.
2-
Press “
” or “
” button to select an icon. Press
“
” for more options.
3-
Use “
” or “
” button to highlight.
4-
Press “
” or “
” buttons to change the settings.
Press
OK
to set as default.
5-
To exit the menu or return from sub-menu screen,
press
M
.
These explanations are available for the navigation
of the whole Menu System. to select options that are
explained in the following parts, refer to “
Navigat-
ing The Menu System
”.
Initial Settings
When the TV is turned on for the first time, it is in the
digital mode.
Because this is the first time the TV is used, there are no
channels stored in the memory and the following message
appears on the screen.
Please ensure aerial is plugged in.
Do you want to start a utomatic searc h?
Yes
No
• To start installation process, select
“Yes”,
to cancel
select
“No”.
• To select an option
“Yes
or
No”,
highlight the item by
using
or
buttons and press the “OK” button.
The IDTV will automatically tune to the UHF transmision
channels 21 to 68 looking for digital terrestrial TV broad-
casts and displaying the names of channels found.
This process will take about five minutes. To cancel
searching, you can press the
"M"
button at any time
during the process.
MENU
BBC ONE
BBC TWO
BBC CHOICE
Searc hing UHF c hannels 30. Please wait. This will take a few minutes
Canc el searching
AUTOMATIC SEARCH
Channels:
12 %
After
Automatic Search
process is completed, the
following message asking for analogue channel search
appears on the screen. TV switches to the analogue
TV mode.
Yes
Do you want to searc h for
analogue c hannels?
No
ENG-20725-1050UK-20 INCH TFT 17MB24-UK IDTV-(LINE OUT)(WO PC-WO YPbPr)(LIPS)-50107492.p65
26.06.2007, 14:36
5
