Installation
Step 1: Aerial Connections
Connect your aerial cable socket to the rear of the TV set.
We recommend that you connect all other equipment before Plug &
Play
.
The following examples are our recommended standard connection. For
further information please consult your local dealer. Please refer toindivi-
dual Instruction Manuals for each equipment for their connection sugges-
tions.
For all aerial circuit problems please consult your local dealer.
Step 2 : Connecting Power Supply
Note:
The form of the AC code and AC plug are different with each
country.
Model CE20LC4-B
Connect AC power cord into AC outlet.
Models CE15LC4-B
Connect the power with following steps:
1. Connect AC power cord to AC Adapter.
2. Connect AC adapter DC output to DC IN of the monitor.
3. Connect AC power cord into AC outlet.
Caution
Do not use without attached cable and adapter, otherwise fire or electric
shock may result. Do not put AC adapter in enclosed place, take appro-
priate spaces for cooling.
Note
: AC adapter becomes little hot while use, this is normal, not malfunc-
tioning.
Control Panel
Each button listed this section has the same function as it’s corresponding
button on the Remote Control.
Step 3 : Switching on / Plug & Play
1. Press Power
ON/OFF
button to switch on the TV set. Next menu will
be displayed.
2. Once finished, the TV set will show the Ending Message. Press
MENU
button to start watching.
This procedure only appears at the first switch-on time.
Viewing Angle Adjustment
You can modify the viewing angle of your
LCD TV. To do so hold its base firmly and
tip the television set backwards or forwards
by pushing at the top.
WARNING
: Do not place you hand under
the screen when tipping the television set
forwards.
Viewing Angle Adjustment -
Maximum tilt
is 5° to the front and 10° to the backward.
Removing the television set base
Tools needed: Philips screwdriver.
IMPORTANT
: Place the TV with the screen facing downwards on top of a
soft surface so that you protect both the screen and the cabinet.
1. Remove the screw at the back of the base.
2. Remove the four screws from the metal base.
WARNING
: Hold the base firmly when removing the last screw so that it
does not fall.
3. Remove with care the base
from the television set.
Once you have removed the base, you will see some screw components
that will allow you to fix the set to the wall using a standard base. Please
note: This base is not supplied, but you can find it in any shop that spe-
cialises in this type of component.
Volume
Programme
Up/Down
Stand-by and Power Indicator
Remote Control Detector
Power ON/OFF button
3
L/S
R/D
O
A
A
V
V
2
1
ANT. 75
12V
ANT. 75
12V
Thank you for purchasing your
SANYO TV. Now I am searching
and storing all the programmes.
Please Wait.
Auto set-up completed. Happy viewing
42251811.qxd 20/05/2005 19:06 PÆgina 4
