background image

Warnings and Cautions

Warning

High voltages are used in the operation of this television receiver. Do not

remove the cabinet back from your set. Refer servicing to qualified servi-

ce personnel.

Do not drop or push objects into the television cabinet slots or openings.

Never spill any kind of liquid on the television receiver.

To prevent fire or electrical shock hazard, do not expose the television

receiver to rain or moisture and do not overload wall outlets and extension

cords.

Caution

Avoid exposing the television receiver to direct sunlight and other

source of the heat.

Do not place candles or hot

objects upon the TV, next to it or

behind it. Open flames must

never be used near the TV set.

If the television is to be built into a compartment or similarly enclosed, the

minimum distances must be maintained. Heat build-up can reduce the

service life of your television, and can also be dangerous.

Minimum Distances

Do not block the ventilation holes in the back cover. Adequate ventilation

is essential to prevent failure of electrical components.

The TV set is prepared for a mains voltage AC220~240V, 50Hz. To com-

pletely switch off the mains or when the television receiver is not used for

an extended period of time, it is advisable to disconnect the AC power

cord from the AC outlet.

Do not squash power supply cord under the television receiver.

Care for Using TV Monitor

Screen likely damaged by external shock. When using the TV monitor,

following precautionsshould be taken.

Do not press or hit the screen face.

Do not write, paint or affix anything on the screen.

Do not put anything on the TV monitor.

Do not press

Do not hit

Cleaning the TV Monitor

Be sure to disconnect the AC Power Cord from AC outlet before cleaning

the TV monitor.

Gently wipe the screen and 

Caution 

Screen can easily be 

cabinet with dry soft cloth.

damaged if it is cleaned with any

liquid or chemicals.

Your sales person can recommend approved stands or shelf and wall

mounting instructions.

Environment Recommendations

• 

Stand-by

: In order to save energy, it is advisable to switch off the TV

when it is not being watched.

• 

Used batteries

: Do not dispose of the battery along with household

waste. Contact your local waste disposal agency for the address of the

nearest battery deposit site.

Manufactured under license from BBE Sound, Inc.

Licensed by BBE Sound, Inc. under USP5510752 and

5736897. BBE and the BBE symbol are registered trade-

marks of BBE Sound, Inc.

BBE

only in 

20” 

models.

Your SANYO product is designed and

manufactured with high quality materials

and components which can be recycled

and reused.

This symbol means that electrical and

electronic equipment, at their end-of-life,

should be disposed of separately from

your household waste.

Please, dispose of this equipment at your

local community waste collection/recycling

centre.

In the European Union there are separa-

te collection systems for used electrical

and electronic products.

Please, help us to conserve

the environment we live in!

R

2

WARNING! High voltages are used in the operation of
this set. Refer service to qualified service personnel.

42251811.qxd  20/05/2005  19:05  PÆgina 3

Содержание CE15LC4-B













Отзывы: