4
1. Connect your aerial cable socket to the back of the TV set. Fit the
aerial cable as shown or as shown below when AV equipment is
connected.
●
Connecting DVD / VCR player/
Satellite receiver or
Set top box.
We recommend that you connect all other equipment before Plug and
Play. The following examples are our recommended standard connec-
tion. For further information please consult your local dealer.
2. Connect the DC power supply adaptor to the LCD TV set. (supplied
with the set).
3. Connect the power cord of the LCD TV to a wall outlet.
✐
The TV set is prepared for a mains voltage AC220~240V, 50Hz. To
disconnect completely from the mains or, when the TV set is not to
be used for an extended period of time, it is advisable to discon-
nect the power cord from the power outlet.
✐
For all aerial problems please consult your local dealer.
Install two "AA" 1.5 volt batteries so that the "+" and "-" marks on the
batteries match the "+" and "-" marks inside the unit into the remote
control handset.
INST
INST
ALLA
ALLA
TION
TION
Step : 1 Connections ( Essential)
DC 19V
R/D
L/S
DC 19V
DISH
IN
For satellite
only
Set top box
or
Satellite
VCR
OUT
IN
OUT
IN
VCR
TV
DVD
LCD TV
AC Mains Outlet
WARNING! High voltages are used in the operation of
this set. Refer service to qualified service personnel.
Step : 2
Remote control battery installation
DC 19V
