Sanyo AVC-100, Инструкция по установке и эксплуатации

Страница: 39 / 65

57
DVD
TO START PLAYBACK
Open up the monitor.
z
See p.28
1
Insert disc in the unit with the printed side up.
z
See p.36
: The unit automatically starts playback.
2
¡
Depending on the disc, touch on the screen to start palyback (on the remote controller, press
!
).
¡
Depending on the disc, a menu may appear on the screen when a DVD is inserted. In this case,
z
See
p.63.
¡
The operation buttons appear for roughly 5 seconds. By touching the screen, the operation buttons appear
again.
¡
To remove the operation buttons quickly, touch the screen.
å
/
Ü
Hint
TO STOP PLAYBACK
Touch the screen and touch (on the remote
controller, press
$
.) on the screen.
Playback stops. (“RESUME PLAYBACK FUNCTION” is activated.)
Ñ
RESUME PLAYBACK FUNCTION
¡
By touching during playback, the unit will save in the memory the
position where you stopped playback, and starts Resume playback
even after the unit is turned off, or eject the playing disc. This is called
“RESUME PLAYBACK FUNCTION”. When this function is active, the
image/audio is off.
¡
After the disc being played is ejected, the unit stores the point where
you stopped playback for up to 10 discs and starts Resume playback.
¡
In this case, when storing a resume point for the 11th disc, the stored
resume point for the 1st disc is cleared automatically.
Ñ
Touch the screen and touch (on the remote controller, press
!
).
Playback will resumes from the position where it was stopped.
å
/
Ü
<How to playback from the position where it was stopped…
■
To start playback again… .
<How to playback the disc from the beginning…
q
Touch the screen and touch (on the remote controller, press
$
).
w
Touch the screen again and touch (on the remote controller, press
!
).
Playback starts from the beginning of the disc.
å
/
Ü
Ñ
VARIOUS PLAYBACK FUNCTIONS (1)
DVD
#AVC-100(GB)P044〜096 05.6.27 1:21 PM ページ57