Sanyo AVC-100, Инструкция по установке и эксплуатации

Страница: 10 / 65

15
REMOVING THE UNIT
Release key
Face the hook inwards.
Make sure the ignition is turned off, and then disconnect the cable from the vehicle
battery’s negative (–) terminal.
1
Remove the metal strap attached the back of the unit (if attached).
2
Engage the release keys with the outer trim ring, then pull the release keys to remove
the outer trim ring.
3
Insert the release keys into the slots at the middle left and right sides of the unit until
they click, then pull the unit out of the dashboard.
4
#AVC-100(GB)P000〜043 05.6.27 1:20 PM ページ15