Sanyo 42LM4WPN, Инструкция по эксплуатации

Страница: 5 / 76

5
1 . The LCD display will have a Standby light to show there is power.
2. Control buttons (bottom edge of cabinet)
Menu/F button:
rotate between contrast, Brightness, colour and
sharpness
Input/ OK button: s
witch between TV, AV1, RGB, AV2, AV3,
HDMI and PC mode.
e d
buttons:
adjust channels up and down
4
button:
To switch from display to standby mode (to switch off
completely disconnect the monitor from the power supply)
Many of your monitors functions are controlled through the menu
function.
During menu operation the bottom of the screen will show which
controls can be used.
Press the
u
button to enter the main menu.
A sub menu is selected using the
e
or
d
button and pressing the
8
button when the required sub menu is highlighted.
When you have set a Sub menu you can press the MENU button to
exit, then the MENU button again to exit the main menu.
1. Press the MENU button. Select Picture using the
e
or
d
button.
Press the
8
button to enter.
Set the picture settings for your “ personal” preference.
2 . Use the
e
or
d
button to select eg. Brightness and the
7
or
8
button to adjust levels.
3. Preset : You can select either your “Personal” settings, or
Dynamic, Standard or Eco settings.
4. Noise Reduction: May be used to reduce any local picture ‘noise’
(granular appearance) being experienced by Using
7
or
8
to select
between Mid / High / Auto / Low / OFF.
5. Dynamic skin tone: May be used to enhance skin tone by Using
7
or
8
to select between On / Off.
Tint : is only available if NTSC equipment is connected.
6. Text Brightness: May be adjusted by Using
7
or
8
button to
select between Min / Mid / Max.
To exit press the MENU button.
✐
Your personal settings are automatically saved when you exit the
menu.
INST
INST
ALLA
ALLA
TION
TION
GB GB
Terminals
1
2
Picture menu
Brightness
Contrast
Colour
Sharpness
Preset Personal / Dynamic / Standard / Eco
Noise Reduction Mid / Max / Auto / OFF / Min
Dyn. Skin
Text Brightness Max / Mid / Min
Tone ON / OFF
Child lock OFF / ON
OSD language
Timer
Text Language East / West / Cyrillic / Greek
AV2 setting RGB, H/V / Y Pb Pr
Program Sort (Program sort) -
MOVE / DELETE
Program pos.
Program name
Sound System
Auto Tunning
Frequency
Skip
ON / OFF
MHz
Memory
OK to save
Off Time ON / OFF
Picture
: Select : Adjust
MENU
: Back
Brightness
Contrast
Colour
Sharpness
Preset Personal / Dynamic / Standard / ECO
Noise Reduction Mid / Max / Auto /
/ OFF
Dyn. skin tone ON / OFF
Text Brightness Min / Mid / Max
Min
Main Menu
Picture
Setting
Preset
: Select : Adjust
MENU
: Exit
Menu Operation